Isla Bennett
IBD gel nails are a popular choice for those seeking a long-lasting, natural look. The soak-off gel nail system offers a user-friendly alternative to acrylics and traditional gels, with a simple brush-on application that wears like hard gel. However, some users have reported issues with the product lifting and streaking. To remove IBD gel nails, it is recommended to use the IBD Gel Remover Soak, although filing and acetone can also be used.
Soaking Off IBD Gel Nails
| Characteristics | Values |
|---|---|
| Removal Process | Soak nails in acetone |
| Removal Time | Approximately 20 minutes |
| Removal Frequency | Every 3-4 weeks |
| User-Friendliness | Mixed reviews, some find it easy to use, others report it is not user-friendly |
| Application | Brush-on application |
| Curing Time | 3 minutes |
| Curing Lamp | UV or LED |
| Curing Process | Cure for 30 seconds with LED lamp or 1 minute with UV lamp |
| Appearance | Natural-looking |
| Finish | High gloss, permanent, ultra-shiny |
| Formula | Self-levelling, non-flammable, non-yellowing, no buffing needed |
Explore related products
What You'll Learn
IBD Soak Off Gel Nail System Kit
The IBD Soak Off Gel Nail System Kit is a five-step process that helps you create beautiful, long-lasting, natural-looking nails. The kit includes everything you need to create natural nail overlays and nails using a tip or nail form. The soak-off gel applies like a soft gel but wears like a hard gel, providing a tough, permanent, ultra-shiny finish.
The kit includes a nail dehydrator to prep your nails, as well as a gel polish with added flexibility and strength. The soak-off gel is LED and UV curable, with a curing time of 3 minutes and a soak-off time of approximately 20 minutes. The gel is formulated with moisturizing oils to prevent drying of the natural nail and cuticles.
To use the kit, follow the instructions provided. You will need to purchase a brush and a UV lamp separately, as these are not included in the kit. Apply the gel polish as instructed, using the brush to achieve a smooth, streak-free finish. Allow the gel to cure for the recommended time, and repeat as needed until you achieve the desired results.
When it's time to remove the gel, you can use the IBD Gel Remover Soak or acetone. Follow the instructions provided with the remover, and be careful not to over-clean, as acetone can break down the gel if used too frequently.
Best Nail Files for Gel Nails: A Comprehensive Guide
You may want to see also
Explore related products
Using acetone to soak off IBD gel nails
To use acetone for removing IBD gel nails, follow these steps:
- Cut cotton balls or strips to the size of each nail. Using cotton that is approximately the same size as each nail reduces the risk of getting acetone on your skin.
- Soak each piece of cotton in acetone.
- Place each piece of soaked cotton on top of the corresponding nail and wrap the nail with plastic food wrap. Ensure a tight seal, but avoid wrapping your nails too tightly as it may cut off circulation.
- Wait for about 10 minutes to allow the acetone to take effect.
- Carefully remove the plastic wrap and cotton from your nails.
- Use a cuticle pusher to gently push off the gel nail from the surface of the natural nail. Be cautious not to pull or force the nail off, as it may damage the natural nail.
- Use a nail file to buff out any remaining gel on the nail surface. Be gentle and careful to avoid removing any of the organic nail.
- Wash your hands with gentle soap and water to remove any remaining acetone.
- Apply cuticle oil and hand lotion to rehydrate the nails and surrounding skin.
It is important to note that acetone can damage sinks, countertops, and furniture. Therefore, it is recommended to protect your work area by lining it with plastic wrap and placing a thick towel on top before starting the removal process. Additionally, always read the instructions provided with your IBD gel nail kit and follow the recommended procedures for the best results.
Explore the Pros and Cons of Regular Polish over Gel Nails
You may want to see also
Explore related products
IBD gel nail removal without acetone
IBD gel nail removal can be done without acetone, although acetone is a very common tool for removing gel nails. If you are using IBD's Soak Off Gel, you should use the IBD Gel Remover Soak to remove them. However, if you are using their traditional gels, they are not removable by soaking in acetone. Instead, you should file them until they become opaque or cloudy, indicating that the seal has been broken from the natural nail. You can then remove the gel by sliding a pusher between the product and the natural nail.
There are other alternatives to acetone that you can use to remove gel nails. Hand sanitizers, hydrogen peroxide, and cuticle oil are some of the most popular and effective methods. You can also try a kitchen oil like olive oil. If you have nothing else on hand, warm, soapy water or vinegar can be used to remove gel nails.
If you are removing the gel nails yourself, be sure to take your time and go slow to avoid damaging your natural nails. You can also go to a salon to have them removed professionally.
Gel Nails: Structuring the Perfect Manicure
You may want to see also
Explore related products
IBD Builder Gel
To prepare for the IBD Builder Gel application, first, gently push back the proximal nail fold using a cuticle pusher. Then, remove the exposed cuticle and the shine from the natural nail plate using a 180-grit Emerald file. Next, remove all filing dust from the nail plate with a dry nail wipe and apply a dehydrator to cleanse the nail plate.
After preparing the nail plate, apply IBD Powerbond to the nail plate, avoiding contact with the surrounding skin. Then, apply IBD forms and sculpt a thin extension covering 1/3 of the nail plate to the desired free edge length with the Builder Gel. Repeat if necessary to build the proper structure and apex. Apply the Builder Gel to all remaining nails and cure for 30 seconds with an LED lamp or 1 minute with a UV lamp.
Finally, remove the nail forms and the inhibition layer from the nails with Cleanser Plus and a nail wipe. File and shape the nails with a 180-grit Emerald file and remove all dust with a clean, dry nail wipe. Finish the nails by applying the Builder Gel Top Coat, curing for 30 seconds with an LED lamp or 2 minutes with a UV lamp. Cleanse with Cleanser Plus and moisturize the skin by applying IBD Lavender Cuticle Oil.
Are Your Gel Nails Cured? How to Know
You may want to see also
Explore related products
IBD gel nail removal for beginners
If you are a beginner, it is recommended that you try another system as the IBD Soak Off Gel Nail System Kit is not very user-friendly. The kit does not come with brushes to apply the product, and you will need to buy a UV lamp as well. However, if you still want to try the IBD Soak Off Gel Nail System Kit, there are detailed instructions available, and you can also find tutorials on YouTube.
Before you begin, make sure you have everything you need. You will need a brush to apply the gel, a UV lamp, and a cuticle pusher. You might also want to get a brush cleaner and an intense sealer, as recommended by the booklet.
Now, for the removal process. First, gently push back the proximal nail fold using a cuticle pusher. Next, remove the exposed cuticle from the nail plate. Then, remove the shine from the natural nail plate using a 180-grit Emerald file. Make sure to remove all the filing dust from the nail plate with a dry nail wipe.
After you have completed these steps, apply Dehydrate to cleanse the nail plate. Then, apply IBD Powerbond to the nail plate, being careful to avoid contact with the surrounding skin. Next, apply the IBD forms and soak your nails in warm acetone. This process can take up to an hour, and you may need to file the gel to help remove it.
Finally, file and shape the nails with a 180-grit Emerald file and remove all dust with a clean, dry nail wipe. Finish the process by applying a Building Gel Top Coat, curing for 30 seconds in an LED lamp or 2 minutes in a UV lamp. Cleanse with Cleanser Plus and moisturize the skin by applying IBD Lavender Cuticle Oil.
Gel X Nails: Pop Off or Not?
You may want to see also
Frequently asked questions
To soak off IBD gel nails, you will need to first gently push back the proximal nail fold using a cuticle pusher. Next, remove the exposed cuticle and shine from the natural nail plate using a nail file. Then, remove all filing dust from the nail plate with a dry nail wipe and apply a nail dehydrator to cleanse the nail plate. Finally, soak your nails in warm acetone for around 20 minutes to remove the gel polish.
To soak off IBD gel nails, you will need a cuticle pusher, a nail file, a dry nail wipe, a nail dehydrator, and warm acetone.
Soaking off IBD gel nails typically takes around 20 minutes.
The IBD Soak Off Gel Nail System Kit is a nail polish system that offers an alternative to acrylics and non-soak-off gels. The kit includes gel nail polish, a cleanser, and an LED lamp.
