Noah Sinclair
Mylee Builder Gel is a versatile product that can be used to create a variety of nail looks. It is a thick gel used for short nail extensions and as an overlay over natural nails to provide extra strength and durability. The gel comes in a range of colours, including peach, pink, white, and clear, allowing users to choose a shade that suits their desired nail design. When using Mylee Builder Gel on natural nails, it is important to start with proper nail preparation, including filing, buffing, and cleansing the nails. After nail prep, users can apply the builder gel and cure it under a UV lamp for 2 minutes or an LED lamp for 60 seconds. This process can be repeated to build up strength, creating longer-lasting and stronger natural nails.
| Characteristics | Values |
|---|---|
| Preparation | File, buff, and shape nails with a nail file, and push back cuticles with a cuticle pusher. Lightly etch the base of the nail plate to create texture for the gel to stick to. Wipe nails clean of dust with a prep solution. |
| Base coat | Apply a thin layer of base coat and cure under a UV lamp for 2 minutes or an LED lamp for 30 seconds to 1 minute. |
| Builder Gel application | Brush the Builder Gel over the entire nail, extending the tip to the desired length. Cure for 1 minute under a UV or LED lamp. |
| Strengthening | Build strength by applying thin layers of Builder Gel and curing for 1 minute each time, or by floating one thicker layer over the nail (be cautious of heat spikes from the lamp). |
| Shaping | Remove the nail form and file the tip into the desired shape. |
| Colour application | Apply your chosen colour of Mylee gel polish. |
| Embellishments | Apply a small amount of Builder Gel to the desired position of any jewels or decals, place them on top, and cure for 2 minutes under a UV lamp or 1 minute under an LED lamp. |
| Encapsulation | Float another layer of Builder Gel over the decal and full nail to encapsulate, then cure. |
| Removal | Buff the surface of the nails with a nail file, then file off the majority of the Builder Gel. Soak a cotton pad with Mylee Gel Remover and place it onto the nail, securing with foil. After 10-15 minutes, remove the pads and push away any remaining product with a cuticle pusher or orange stick. Re-buff and re-wrap the nail if necessary. |
| Aftercare | Apply cuticle oil and hand cream to hydrate nails. |
Explore related products
Nail preparation
File and Shape Your Nails: Start by using a nail file to shape your natural nails. This step helps create a smooth base for the gel application. Be careful not to over-file, as you do not want to thin out your natural nails too much.
Push Back Your Cuticles: Using a cuticle pusher, gently push back your cuticles to prepare the nail bed for gel application. This step ensures that the gel is applied only to the nail plate, avoiding the sensitive cuticle area.
Create Texture: Lightly buff the surface of your nails with a nail file or buffer. This step is important as it creates a rough texture on the nail plate, allowing the gel to adhere better. Be sure to buff firmly, especially if you are applying a coloured builder gel, as this will help the colour penetrate the UV lacquer.
Cleanse and Degrease: After buffing, use a prep solution or cleanser to wipe your nails clean. Remove all dust and debris to ensure that there is no residue left on the nail plate. This step helps prevent lifting and peeling after gel application.
Apply a Base Coat (Optional): Depending on your preference, you can apply a thin layer of base coat to your nails. This step can help strengthen and protect your nails, especially if you plan to use a coloured builder gel. Cure the base coat under a UV lamp for 2 minutes or an LED lamp for 30 seconds.
Attach Nail Forms (Optional): If you wish to extend the length of your nails, attach paper nail forms before applying the builder gel. Brush the builder gel over the entire nail, extending the tip to your desired length. Cure the gel under a UV or LED lamp for 60 seconds.
Once your nail preparation is complete, you can move on to the next step of applying the Mylee Builder Gel. Remember, proper nail preparation is key to achieving strong, durable, and long-lasting gel nails.
Gel Nail Polish: Pro Tips for Perfect Application
You may want to see also
Explore related products
Applying the gel
Firstly, it is crucial to prepare your nails. Start by filing and shaping your nails with a nail file, ensuring you don't damage them. Push back your cuticles with a cuticle pusher, and then lightly etch the base of your nail plate with the file to create texture. This step is essential, as it helps the gel adhere to your nails. Finally, wipe your nails clean with a prep solution like Mylee's Prep and Wipe to remove any dust or cuticle residue.
The next step is to apply a base coat. You can use a regular gel base coat or a thin layer of clear Builder Gel. Cure your base coat under a UV lamp for two minutes or an LED lamp for 30 seconds to one minute.
Now you are ready to apply the Builder Gel. Brush the gel over your entire nail, extending the tip to your desired length. Cure this layer under the lamp for one minute.
To build strength and achieve your desired look, apply additional thin layers of Builder Gel, curing for one minute after each application. Alternatively, you can apply one thicker layer, but be cautious of heat spikes from the lamp.
Finally, you can add any desired embellishments. Apply a small amount of Builder Gel to the area where you want to place your jewel or decal, then place it on top and cure for two minutes under a UV lamp or one minute under an LED lamp. Finish by floating another layer of Builder Gel over the decal and the entire nail to encapsulate it, then cure once more.
After curing the final layer, wipe off any sticky residue with Mylee's Prep and Wipe, and you're done! Enjoy your stronger, more durable natural nails.
Thickening Gel Nail Polish: Easy Tricks to Try at Home
You may want to see also
Explore related products
Curing the gel
Curing the Mylee Builder Gel:
After completing the nail prep, which includes filing, buffing, and shaping the natural nails, it's time to apply the Mylee Builder Gel. Start by applying a thin layer of the gel to the entire nail. If you're using a coloured Builder Gel, it is recommended to apply a base coat first.
Place your hand under the UV or LED lamp. The curing time depends on the type of lamp you are using. For a UV lamp, cure the gel for 2 minutes. If you are using an LED lamp, cure the gel for 60 seconds. This step is crucial as it hardens the gel and creates a strong foundation for your nail design.
Once the first layer is cured, you can add more Builder Gel to build up strength. Apply thin layers of Builder Gel, curing for 60 seconds each time. You can also apply one thicker layer, but be cautious of heat spikes from the lamp. This process will help create a sturdy base for your nail extensions or overlays.
If you are using tips, apply the Builder Gel to the nail and the tip, and then attach the tip before curing. This will ensure that the tip stays securely in place.
After achieving the desired length and strength, finish off by applying another layer of Builder Gel or using a separate top coat. Cure this final layer to lock in the gel and provide a long-lasting finish.
By following these curing instructions, you will be able to achieve salon-quality nails with enhanced strength and durability. Remember to pay attention to the curing times and lamp types to ensure optimal results.
Kiss Gel Fantasy Nails: Long-Lasting, Strong Adhesion
You may want to see also
Explore related products
Adding nail art
Once you've applied your Mylee builder gel and cured your nails, you can add nail art to your manicure. Mylee builder gel is available in a range of colours, including peach, pink, white, and clear, so you can choose a shade that complements your nail art design.
If you want to add some sparkle to your manicure, you can apply loose glitter to your base coat layer or colour gel polish. First, cure your base coat for 30 seconds using a Pro LED lamp. Then, apply your chosen colour gel and cure again. Next, apply the loose glitter to the tacky nail surface using a sponge applicator or by shaking it over your nail. Brush off any excess glitter, and apply a top coat or float a layer of clear builder gel over your nails to encapsulate the glitter and give a smooth finish. Finally, cure your nails for another 30 seconds.
You can also add jewels or decals to your manicure. After applying your base colour, pop a small amount of builder gel where you want to position your jewel or decal and place it on top. Cure your nails for 2 minutes using a UV lamp or 60 seconds with an LED lamp. Then, float another layer of builder gel over the decal and the full nail to encapsulate it, and cure your nails again.
To remove any sticky residue after curing your nail art, use Mylee's Prep and Wipe on a lint-free wipe.
Effective Cleaners for Top Coat Gel Nails
You may want to see also
Explore related products
Removing the gel
Removing the Mylee Builder Gel is a straightforward process. Firstly, you will need to file off the majority of the gel. Then, you can use either acetone or a gel remover to get rid of the remaining product.
If you are using acetone, soak a cotton pad with the solution and place it onto your nail, securing it with foil. After 10-15 minutes, firmly pull off the pads and use a cuticle pusher or orange stick to gently push away any loose product. If there is still some product remaining, you can re-buff and re-wrap your nails.
Alternatively, you can use a gel remover like the Mylee Magic Gel Remover. After buffing your nails, apply the gel remover and leave it for 6 minutes. The gel will start to bubble and peel, and you can use a gel scraper to push off the product.
Finally, apply cuticle oil and hand cream to hydrate your nails.
Primer for UV Gel Nails: A Necessary Step?
You may want to see also
Frequently asked questions
First, prep your nails by filing them into shape and pushing back your cuticles with a cuticle pusher. Then, buff the surface of your nails with a nail file, being careful not to damage them. Next, apply a thin layer of Mylee 5-in-1 Builder Gel and cure under a UV lamp for 2 minutes or an LED lamp for 60 seconds. You can then apply your chosen Mylee gel polish colour. Finally, apply another layer of Builder Gel or a separate top coat and cure.
As well as filing and buffing your nails, it's important to lightly etch the base of your nail plate with your file to create texture for the gel to stick to. You should also cleanse your nails thoroughly with a prep solution to remove any dust or cuticle residue, as this can cause the gel to lift and peel.
Yes, you can use Builder Gel with tips. Apply the Builder Gel to your natural nail and the tips, then attach the tip before curing under a UV or LED lamp.
Yes, Builder Gel can be used as a base coat to strengthen and protect your nails. If you're using it as a base coat, apply a thin layer of clear Builder Gel and cure under a UV or LED lamp.
