Liam Carter
Diva DC gel nail Ultrabond is a product from the DND line, which is known for its gold bottle packaging and a volume of 0.6 fl oz (18ml). The DND line offers a wide range of colours that are available separately or in duo packs that consist of a gel polish and a traditional air-dry lacquer. To use Diva DC gel nail Ultrabond, it is recommended to first wash and prep your nails to remove any dirt, oil, or excess off your nail beds. Next, apply 1-2 coats of the base gel and cure under a UV/LED lamp for 30-45 seconds. Then, apply a thin layer of gel colour and cure again under the UV/LED lamp for 30-60 seconds. Repeat this process for 2-3 coats. Finally, apply the top coat and cure under the UV/LED lamp once more for 30-45 seconds.
| Characteristics | Values |
|---|---|
| Packaging | Gold bottle |
| Volume | 0.6 fl oz (18ml) |
| Preparation | Wash and prep nails to remove any dirt, oil or excess off nail beds |
| Base Gel | Apply 1-2 coats of DND or DC Base Gel |
| Curing | Cure under a UV/LED lamp for 30-45 seconds |
| Gel colour | Apply the first thin layer of gel colour |
| Curing | Cure under a UV/LED lamp for 30-60 seconds |
| Coats | Repeat for 2-3 coats |
| Top Coat | Apply DND or DC Top Coat |
| Curing | Cure under a UV/LED lamp for 30-45 seconds |
| Non-wipe top coat | Remove sticky residue with alcohol |
| Hydration | Hydrate cuticles regularly to avoid chipping or peeling |
| Removal | Soak the whole nail bed in a bowl of acetone on top of a bowl of warm/hot water |
Explore related products
What You'll Learn
Wash and prep nails
To use Diva DC Gel Nail Ultrabond, you must first wash and prep your nails. This is a crucial step to ensure the gel nail polish adheres properly and lasts for several weeks without peeling or chipping. Here is a step-by-step guide on how to properly wash and prep your nails:
Start by washing your hands with an oil-free soap and water. Dish soap is an excellent choice for this step as it effectively removes oils from the skin and nails. Make sure to wash thoroughly, and then dry your hands completely.
Next, shape your nails to your desired length and style. You can use a nail file or nail clippers for this step. After shaping, gently push back your cuticles using a cuticle pusher or orangewood stick. Be careful not to cut or remove your cuticles, as this can lead to pain and infection.
Once your nails are shaped and your cuticles are pushed back, use a prep pad or cotton ball soaked in nail polish remover to wipe away any remaining oil, dirt, or residue from your nail beds. Ensure that your nails are completely dry before moving on to the next step.
If you have any leftover gel polish or residue on your nails, you will need to remove it properly. Soak a cotton ball in acetone, place it on each nail, and wrap your fingertips in foil to hold the cotton balls in place. Allow the acetone to soak for 10-15 minutes, and then use a pusher to gently remove the softened gel. Repeat this process if necessary until all the gel is removed.
After your nails are clean and prepped, you can continue with the next steps of applying the Diva DC Gel Nail Ultrabond, following the product instructions. Remember to always work in a well-ventilated area when using nail products and to avoid prolonged exposure to UV light.
Gel X Nail Polish: The Ultimate Guide to This Trendy Manicure
You may want to see also
Explore related products
Apply base gel and cure
To apply the base gel and cure, start by washing and prepping your nails to remove any dirt, oil, or excess material from your nail beds. You can use an oil-free soap and water to wash your hands, and then shape your nails and push back your cuticles. Be sure to remove any remaining oil and residue from your nails. It is important to ensure that your nails are completely dry before applying the base gel.
Next, apply 1-2 coats of the base gel. The number of coats you apply will depend on the desired thickness and opacity of your manicure. After applying each coat of base gel, cure your nails under a UV/LED lamp for 30-45 seconds. This will ensure that the gel hardens and sets properly.
If you are using clear nail tips, we recommend curing twice to ensure that the gel is fully hardened all the way through. Additionally, if you are using a thick layer of glue, it is advisable to cure twice to make sure that the glue is fully cured.
After curing the base gel, you can move on to applying the first thin layer of gel colour. Remember to avoid prolonged exposure of the gel polish to UV light, as this can affect the curing process and the durability of your manicure.
Gel Nail Dryers: Regular Polish, Does It Work?
You may want to see also
Explore related products
Apply thin layer of gel colour
After applying 1-2 coats of DND or DC Base Gel and curing your nails under a UV/LED lamp for 30-45 seconds, it's time to move on to the gel colour.
Apply a thin layer of gel colour, being careful to avoid contact with the cuticle and surrounding skin. Focus the application on the nail bed to prevent any reaction. You can use the enclosed Prep Pad to remove any gel colour that gets on your skin. Make sure you're applying the gel colour to completely dry nails.
Cure your nails under a UV/LED lamp for 30-60 seconds. The clear nails only need 60 seconds to cure, but the sheer design nails must be cured twice. If you used a thick layer of glue with a clear nail tip, cure your nails twice to ensure the glue is fully hardened.
Repeat the process of applying a thin layer of gel colour and curing under a UV/LED lamp for 30-60 seconds. You can apply 2-3 coats of gel colour in total. Remember that some colours, like black and white, may require a longer cure time in an LED lamp to prevent uncured gel from chipping or peeling.
Finally, apply the DND or DC Top Coat and cure your nails under a UV/LED lamp for another 30-45 seconds.
The Pros and Cons of Adding Extra Top Coats to Gel Nails
You may want to see also
Explore related products
Apply top coat
Once you've applied your final layer of gel colour and cured it under a UV/LED lamp, it's time to apply your top coat.
Firstly, ensure your nails are completely dry. Then, apply a thin layer of top coat. You can use either the DND or DC Top Coat. Cure your nails under a UV/LED lamp for 30-45 seconds. If you are using a non-wipe top coat, you don't need to do anything else at this stage. If not, use a small amount of alcohol to remove any sticky residue.
If you are using the Dashing Diva One Gel Top Coat, you can be sure that it is compatible with all Dashing Diva products. This top coat will enhance the shine and durability of your manicure.
To remove the top coat, buff the surface of your nails to disrupt the outer layer. This will allow the remover to reach the gel polish.
Gel Nails: Filling In Grown Outs Like a Pro
You may want to see also
Explore related products
Remove with acetone
To remove your Diva DC gel nail polish with acetone, you will need acetone, cotton balls, a coarse nail file, foil, and a pusher.
Firstly, loosen up the top gel layer by filing with a coarse nail file. Next, place a cotton ball soaked in acetone on each of your nails and wrap the tip of your finger in foil to hold the ball in place. Soak for 10-15 minutes. If you don't want to use foil, you can soak the whole nail bed in a bowl of acetone placed on top of a bowl of warm/hot water. If the gel is flaking off, use a pusher to gently remove the remaining loose layer. If the gel is still intact, continue to wrap with the acetone-soaked cotton ball for a longer period.
If you are using Dashing Diva's One Gel, you will need to use their One Gel Magic Off product. Blot a thick layer of the Magic Off onto nails. After 3 minutes, the remover will begin activating, however, you may experience the best results by waiting 5-7 minutes. Once the gel begins to bubble off, use the included tool to push the gel off your nails. Repeat until all the gel is removed.
If you experience any discomfort, run your nails under cold water and wipe the remaining product off your skin. Avoid contact with the cuticle and surrounding skin, focusing the remover exclusively on your nail beds to prevent any reaction.
Transforming Regular Nail Polish to Gel: Is It Possible?
You may want to see also
Frequently asked questions
First, wash and prep your nails to remove any dirt, oil, or excess off of your nail beds. Next, apply 1-2 coats of DC Base Gel and cure under a UV/LED lamp for 30-45 seconds. Then apply the first thin layer of gel colour. Follow up by curing under a UV/LED lamp for 30-60 seconds. Repeat for 2-3 coats. Finally, apply DC Top Coat and cure under a UV/LED lamp for 30-45 seconds.
Blot a thick layer of One Gel Magic Off onto nails. After 3 minutes, the remover will begin activating, but you may experience the best results by waiting 5-7 minutes. Once the gel begins to bubble off, use the included tool to push it off your nails. Repeat until all gel is removed.
DIVA DC Gel Nail Ultrabond is packaged in square gold bottles with a volume of 0.5 fl oz (15ml). DND Gel comes in classic white packaging and has a volume of 0.5 fl oz (15ml).
Make sure to cap your free edge to help seal the edges of your manicure/pedicure. Also, make sure to hydrate your cuticles regularly to avoid chipping or peeling.
