Sophia Delgado
The KISS Brush-On Gel Nail Kit is a popular at-home gel manicure kit. It includes everything you need for a long-lasting manicure, including gel glue, a gel activator, a brush cleaner, and 48 easy-to-apply nail tips in two different styles. The kit promises a smooth and shiny finish without the need for buffing and dries fast in under 5 minutes with no curing light required. While some users have found the application process easy, others have complained about the quality of the brush.
How to use the KISS Brush-On Gel Nail Kit
| Characteristics | Values |
|---|---|
| Application time | <5 minutes |
| Curing light needed | No |
| Wear duration | Up to a week |
| Waterproof | Yes |
| Smudge-proof | Yes |
| Chip-proof | Yes |
| Dry time | None |
| Number of nail tips | 48 |
| Tip options | French finish, natural colour |
| Tip shape | Square |
| Tip colour | Clear, white |
| Ease of use | Beginner-friendly |
| Removal | Acetone, KISS Glue OFF |
Explore related products
What You'll Learn
Preparing your nails
Step 1: Protect Your Work Area
Start by protecting your work surface with paper towels. This will create a clean and mess-free space for you to work on and make the clean-up process easier.
Step 2: Push Back Cuticles
Using a manicure stick, gently push back your cuticles. This step is important as it creates a neat and tidy base for your gel nails. Take your time with this step to ensure your cuticles are pushed back evenly on all nails.
Step 3: Trim, File, and Buff Nails
Trim your nails to your desired length and shape. Then, use a nail file to smooth out any rough edges and create your preferred nail shape. It is recommended to lightly buff the nail surface to remove any shine and create a slightly rough texture, which will help the gel adhere better. Avoid excessive filing on the natural nail surface, as you don't want to thin out your nails too much.
Step 4: Remove Dust and Clean Nails
After filing and buffing, there may be dust or debris on your nails. Wipe your nails clean with acetone polish remover to ensure they are free of any residue. This step is crucial as it ensures the gel will adhere properly to your nails.
Step 5: Select the Correct Size Nail Tips
The KISS Brush-On Gel Nail Kit comes with 48 easy-apply nail tips in two options: 24 natural tips and 24 French tips. Choose the correct size tip for each finger and set them aside in order before beginning the application process. If needed, you can also file the sides of the nail tips for a more accurate fit.
Step 6: Prepare for Application
Hold the selected nail tip with the Easy-Apply Tab and apply the Brush-on Gel to the back well area of the nail tip, which is the part that will adhere to your natural nail. Make sure to follow the instructions on the kit for the correct order of application, as some kits may vary.
By following these steps, you will create a solid foundation for your brush-on gel nail application, ensuring a neat and long-lasting manicure.
The Art of Hot Gel Nails: Pros and Cons
You may want to see also
Explore related products
Applying the gel
Prepare your nails: Start by protecting your work surface with paper towels. Push back your cuticles using a manicure stick. Then, trim and file your nails to the desired shape. It is important to lightly buff the nail surface to create a smooth base, but avoid excessive filing, especially on the natural nail surface. Remove any dust created by the filing process and wipe your nails clean with acetone polish remover.
Select the correct size nail tips: Choose the right size tip for each finger and set them aside in order before you begin. If needed, you can file the sides of the tips for a more accurate fit.
Apply the Brush-on Gel: Hold the nail tip with the Easy-Apply Tab and apply a thin layer of Brush-on Gel to the back well area of the nail tip, which is the part that will adhere to your natural nail. Slowly lower the tip onto your natural nail and hold it firmly until it sets. Repeat this step for the rest of your nails/fingers.
Blend the nail tip with your natural nail: To achieve a seamless look, use the wet brush from the brush cleaner and dip it into the Activator. Apply a thin coat of Activator over the wet gel, just as you would apply nail polish. Ensure you only apply the gel to the nail tip and avoid the skin and cuticle area.
Repeat the process: For a more opaque look and added durability, repeat the previous steps by applying a second layer of Brush-on Gel and Brush-on Activator. You can even apply a third layer if desired.
Finish with a top coat: Once you have applied the gel and activator to all ten nails, finish with a thin layer of Brush-on Gel on all your nails as you would with a regular top coat. Allow the product to dry and harden, which should take less than 5 minutes.
Remember, the Brush-On Gel products will self-level, so you can expect a hard, smooth, and shiny surface without the need for buffing or curing lights.
Gel Nail Polish: Removing Stains from Clothes
You may want to see also
Explore related products
Using the activator
The activator in a brush-on gel nail kit is an essential component for achieving a flawless gel manicure. It is a highly flammable liquid that needs to be handled with caution. Here is a step-by-step guide on using the activator:
Prepare Your Nails
Before you begin the application process, it is important to prepare your nails. Start by protecting your work surface with paper towels. Then, use a manicure stick to push back your cuticles. Trim and file your nails to the desired shape and length. If needed, you can lightly buff the nail surface to remove any shine. Remember to remove the dust and wipe your nails clean with acetone polish remover.
Apply the Brush-On Gel
Begin by selecting the correct size nail tip for each finger and set them aside in order. Hold the nail tip with the Easy-Apply Tab and apply the Brush-on Gel to the back well area of the nail tip, which adheres to your natural nail. Slowly lower the tip onto your natural nail and hold it firmly until it sets. Repeat this step for all your nails.
Take the brush from the Brush Cleaner and dip it into the Activator. Apply a thin coat of Activator over the wet Brush-On Gel, just as you would apply nail polish. Ensure you avoid the skin and cuticle area. Wipe the brush on a paper towel after each nail to keep it clean and soft, and return it to the Brush Cleaner. Repeat this step for all ten nails.
Now, apply a second layer of Brush-On Gel, followed by a second layer of the Activator. For an opaquer look, you can add a third layer of this combination. Remember to keep the activator brush soft by wiping it on a paper towel and returning it to the Brush Cleaner.
Final Steps
Once you have applied the activator to all your nails, finish with a thin layer of Brush-On Gel as you would with a top coat. The gel will self-level and set to a hard, smooth, and shiny surface in under 5 minutes. You can enjoy your nude French manicure as is, or add your favourite nail polish for a pop of colour.
The Brush-On Gel and Activator combination can also be used on your toenails for a quick pedicure. Always remember to read the detailed instructions included in your kit and follow all necessary precautions for a safe and enjoyable manicure experience.
UV Primer Essential for Long-Lasting Gel Nails
You may want to see also
Explore related products
Finishing and shaping
Once you have applied the Brush-on Gel and Activator, you can move on to finishing and shaping your nails.
If you are happy with the length of your nails, you can simply file them to your desired shape. If you want to trim your nails, it is recommended to use a nail nipper, as clipping your nails may cause some lifting at the free edge. If you do decide to clip your nails, use a board hand file with a medium grit of 180 or 150. Place the file straight against the sloping side of the nail and file in one direction.
If you are just reshaping your nails, rather than placing the file on top of the nail, put it under the nail. This way, you won't file off the top coat and can simply add a regular top coat after reshaping. You can also use an emery board file for reshaping. When filing, you want to align the middle point of the cuticle area to the center of the free edge and down in a straight line to match your finger bone.
After filing, dust off your nails with a dry brush. Then, wet the brush with 90% alcohol and dust off your nails again, making sure to brush under the nails.
If you are removing your gel nails, trim off as much of the artificial tip as possible. Then, use an acetone-based polish remover to wipe off the softened overlay and glue.
Matte Nail Polish and Gels: A Good Combo?
You may want to see also
Explore related products
Removal
Removing gel nail polish from brushes can be done in several ways. Firstly, it is important to note that acetone should be avoided as it can ruin the bristles of the brush. While acetone can remove the gel polish, it can also melt the bristles and cause damage.
One method is to use a dedicated nail brush cleaner, which is the recommended approach. These cleaners are designed to remove stubborn nail polish without harming the bristles. Simply pour a few drops of the cleaner onto a lint-free wipe and gently wipe the bristles of the brush until the gel polish is removed. This method is quick and effective, and it ensures that the brush is conditioned and ready for the next use.
Another approach is to use a small amount of isopropyl alcohol on a cotton pad. This method is more cost-effective and easily accessible, as isopropyl alcohol is available at most grocery and home goods stores. Saturate the cotton pad with alcohol and wait about 30 seconds for it to soak in. Then, gently swipe the bristles of the brush back and forth on the pad 9-10 times until the gel polish is removed. Be cautious, as some technicians advise soaking the brush in alcohol, but this can dry out the bristles.
Additionally, if you are switching colours, a simple dry or wet wipe with a lint-free cloth between colours can be effective. If the colour is heavily pigmented or contains glitter, a wet wipe with alcohol added can help remove the gel polish.
For a deeper clean, you can use clear gel or alcohol and clear gel together. This method involves adding a small amount of clear gel to a flat surface and then swiping the brush back and forth to pull the colour out of the bristles.
It is important to note that curing gel on a brush may ruin it, but you can try to save it by soaking the brush in a bit of clear gel. This will prevent or slow down the stiffening process.
Gel vs. Regular Nail Polish: What's the Real Difference?
You may want to see also
Frequently asked questions
First, protect your work surface with paper towels. Push back cuticles with a manicure stick. Trim and file nails, then lightly buff the nail surface to remove surface shine. Remove dust and wipe nails clean with acetone polish remover.
Select the correct size tip for each finger and set them aside in order. Hold the tip with the Easy-Apply Tab and apply the Brush-on Gel to the back of the nail tip. Slowly lower the tip onto your natural nail and hold it firmly until it sets. Repeat this for the rest of your nails. To blend the tip with your natural nail, apply and hold the wet brush from the brush cleaner along the seam of each tip.
The product dries in under 5 minutes and does not require a curing light.
The manicure can last up to a week.
For easy removal, use KISS Glue Off, or soak nails in acetone-based polish remover until soft. Wipe off the softened overlay and glue, and repeat as necessary.
