Sophia Delgado
Beetles Gel Polish is a brand of gel nail polish that has been on the market since 2017. It is known for its high-quality products at an affordable price point, with gel polishes available in singles, sets of six, and even sets of 20. The formula is designed to cure under a UV or LED lamp, forming a hard layer that can last up to two to three weeks without chipping. To make Beetles gel nails last longer, it is important to properly prepare the nails by trimming, filing, and buffing them to create a clean and dry surface. Additionally, curing each layer of polish for a sufficient amount of time, typically 60-90 seconds, can help extend the wear time.
How to make Beetles Gel Nails Last Longer
| Characteristics | Values |
|---|---|
| Nail Prep | Trim, file and buff nails for a clean and dry surface. Push back the cuticle. Remove shine from the natural nail with a file or a drill, especially around the cuticle and edges of the nail. Brush off any dust left behind from filing/buffing. |
| Base Coat | Apply a thin base coat and cure under a UV/LED lamp for 60-90 seconds. |
| Colour Gel | Apply a thin layer of colour gel polish and cure under a UV/LED lamp for 60 seconds. Apply a second layer of colour gel polish and cure for 60 seconds. Apply a third layer of colour gel polish if needed and cure. |
| Top Coat | Finish off with a thin layer of top coat and cure under a UV/LED lamp for 90-120 seconds. |
| Curing | Curing is the process of drying the gel polish under a UV/LED lamp. The time needed depends on the thickness of the gel. |
| Seal Edges | Seal the edges of your nails with the colour and top coat by swiping the brush horizontally onto the edge of the nails. This will help prevent chipping which could lead to peeling. |
| Removal | To remove, gently file the tops of the nails with a gritty file. Soak a cotton ball or pad with nail gel remover and place it on top of each nail. Wrap the nail with aluminium foil or any nail wrap and allow the remover to soak for a minimum of 15 minutes. |
| Poly Nail Gel | Poly Nail Gel can last up to three weeks or more, depending on your nail growth and care. It can be removed by filing it down or soaking it off with acetone. |
Explore related products
What You'll Learn
Ensure nails are clean, dry, and oil-free before application
Before applying gel nail polish, it is important to ensure your nails are clean, dry, and oil-free. Start by trimming your nails to your desired length and shape. Then, use a nail file to gently buff the surface of your nails, removing any shine. This step helps the gel adhere better to your nails. You can also use a buffer to remove any dust or residue left behind from filing or buffing.
It is crucial to ensure that your nails are thoroughly clean and oil-free. You can use an alcohol pad or a dehydrator to remove any moisture or oils from the nail plate. Make sure to cover the entire nail, but avoid touching the skin. After buffing and cleaning your nails, avoid washing your hands until you are completely done with the gel application process.
Additionally, pay attention to your cuticles. Gently push back or remove the cuticles, and ensure they are also free of any oils or residue. By following these steps, you will create a clean and dry canvas for your gel nail application, which will help the gel polish adhere better and last longer.
Gel Nails: Long-Lasting, Durable, and Worth the Hype?
You may want to see also
Explore related products
Use a cuticle remover, then gently scrape off cuticles
Beetles Gel Polish is a brand that offers accessible high-performance gel polish colours and promises long-lasting DIY gel manicures. The brand has hundreds of thousands of near-perfect reviews on Amazon and is available at a fraction of the cost of mainstream brands.
To make Beetles gel nails last longer, it is important to use a cuticle remover, and then gently scrape off the cuticles. This is an essential step in nail prep, which ensures the gel adheres to the nail correctly. Firstly, apply a cuticle remover/softener and leave it on for a couple of minutes. Then, gently scrape off the cuticles with a suitable tool. You can purchase a cuticle remover from most stores, with the Sally Hansen cuticle remover being a great option.
After removing the cuticles, it is important to trim, file, and buff the nails for a clean and dry surface. This will help to create a smooth base for the gel polish to be applied. It is also recommended to remove any shine from the natural nail with a file or a drill, especially around the cuticles and edges of the nails.
Once the nails are prepared, you can start applying the gel polish. It is important to apply thin coats of the base coat, colour gel, and top coat to prevent the gel from shrinking and peeling. Cure each layer under a UV/LED lamp for the recommended time, which is usually 60-90 seconds.
By following these steps and properly removing any cuticles, your Beetles gel nails should last longer and maintain a smooth and shiny appearance.
Gel Nails: Mastering the UV Lamp Technique
You may want to see also
Explore related products
Cure each layer for 60 seconds
Curing your gel nails is an essential step in the manicure process. Curing is a fancy way of saying "dry" and involves placing your nails under an LED or UV lamp for a set amount of time. The purpose of curing is to harden the gel polish, creating a long-lasting manicure.
Beetles Gel Polish recommends curing each layer of polish for a minimum of 60 seconds under an LED lamp or 2 minutes under a UV lamp. The time needed depends on the thickness of the gel. For example, the base coat and top coat should be cured for 90 seconds, while each layer of colour gel polish should be cured for 60 seconds.
It is important to note that different lamps have varying wattages, makes, and curing times, so you may need to adjust the curing time accordingly. Additionally, gel polish is heat and light-sensitive, so it is recommended to store your polishes in a dry and cool area to prevent them from curing in the bottle.
By properly curing each layer of your Beetles gel nails for the recommended time, you can achieve a smooth, shiny, and long-lasting manicure.
Gel Nails: Structuring the Perfect Manicure
You may want to see also
Explore related products
Seal the edges of your nails with the colour and top coat
Sealing the edges of your nails with the colour and top coat is a crucial step in the gel manicure process, as it helps prevent chipping and peeling. Here is a detailed guide on how to do it:
Firstly, ensure your nails are thoroughly prepared. Nails should be clean, dry, and free of any oils. Gently buff the surface of the nails with a nail buffer to create a rough texture, which will help the gel adhere better. You can also use a file or a drill to remove shine, especially around the cuticle and edges. Remember to brush off any dust left behind from filing or buffing. Additionally, you can use a dehydrator or alcohol to eliminate any remaining moisture or oils on the nail plate.
Next, apply your chosen colour gel polish. It is recommended to apply thin coats to achieve a smooth and even finish. After applying the first thin layer of colour, cure it under a UV/LED lamp for 60 seconds. Repeat this process for the second layer of colour. If needed, you can apply a third layer of colour and cure it for the same amount of time.
Once the colour layers are cured, it's time to seal the edges. Using the colour gel polish, swipe the brush horizontally onto the edge of each nail. This technique will help create a smooth finish and prevent chipping. Ensure you cover the entire nail, being careful not to touch the skin.
Finally, apply the top coat. Finish off with a thin layer of top coat, again swiping the brush horizontally to seal the edges well. Cure the top coat under a UV/LED lamp for 90 to 120 seconds. Remember, it is important to use thin coats for both the colour and top coat to avoid shrinkage and peeling.
By following these steps and sealing the edges of your nails with the colour and top coat, you can help extend the longevity of your Beetles gel manicure and prevent chipping and peeling.
Nail Polish Removal: Should You Pay for Gel Removal?
You may want to see also
Explore related products
Use a gel polish remover kit to avoid damaging natural nails
Beetles Gel Polish is formulated to cure under a UV/LED lamp. The time needed depends on the thickness of the gel, but it is typically between 60 seconds and two minutes.
To make your gel manicure last longer, it is important to prepare your nails before applying the gel. Make sure your nails are free of any oils and are completely dry. Gently buff the surface of the nails with a nail buffer to help the gel adhere correctly.
When you are ready to remove your gel manicure, it is important to use a proper Gel Polish Remover Kit to avoid damaging your natural nails. Beetles Gel Polish offers a remover kit that includes 100% acetone to break down the polish effectively.
- Gently file the tops of your nails with a gritty file.
- Soak cotton sheets in acetone and place them on your nail beds.
- Wrap your nails with aluminum foil or a nail wrap to secure the cotton sheets and allow the remover to soak for 15 to 20 minutes.
- Remove the cotton and foil one at a time and gently push off the gel using a removal wand. If the gel does not come off easily, re-saturate the cotton and rewrap your finger, soaking for an additional five minutes.
- Lightly buff your nails again once all the gel is removed.
By following these steps and using a proper gel polish remover kit, you can effectively remove your gel manicure without damaging your natural nails.
Gel Nail Repair: Fixing a Broken Gel Manicure
You may want to see also
Frequently asked questions
On average, gel nails last two to three weeks. However, this depends on your nail growth and how well you take care of your nails.
Before applying the gel, ensure your nails are completely dry, clean, and oil-free. Seal the edges of your nails with the colour and top coat by swiping the brush horizontally onto the edge of the nails. This will help prevent chipping, which could lead to peeling.
Beetles offers a Gel Polish Remover Kit. You will also need 100% acetone to break down the polish effectively. To remove, gently file the tops of the nails with a gritty file. Drench cotton sheets in acetone and allow them to soak on your nail beds. After 15 to 20 minutes, check your nails and perhaps use a metal tool to push the polish off or lightly buff away the gel with a nail file.
