Liam Carter
Bluesky gel nails are an easy and affordable way to achieve a professional-looking manicure at home. The process is simple: after preparing your nails, you apply a base coat, cure it under a lamp, apply two colour coats (curing in between), finish with a top coat, and wipe off the tacky layer. The whole process takes around 30 minutes, and the result is a smooth, high-gloss finish that lasts. Bluesky gel polishes are also vegan and cruelty-free, and free from harsh chemicals.
| Characteristics | Values |
|---|---|
| Buffing | Buff nails to remove the shine so the gel can adhere |
| Cleaning | Clean nails with a cleanser wipe to remove dust and debris |
| Base coat | Apply a thin layer of Bluesky Base Coat to all nails, capping the ends and avoiding the skin and cuticle |
| Curing | Cure the base coat for 60 seconds under a UV or LED lamp |
| Colour coat | Apply a thin layer of colour gel polish, again capping the ends and avoiding the skin |
| Curing | Cure the colour coat for 60 seconds |
| Top coat | Apply a layer of top coat and cure for 90-120 seconds |
| Residue | Use a cleanser wipe to remove the sticky residue |
Explore related products
What You'll Learn
Prepping your nails
Push back your cuticles: Use a cuticle pusher to gently push back the cuticles on each nail. This step is important as it creates a clean and neat nail bed for the gel polish application.
Remove shine from nails: Use a nail buffer to gently buff the surface of your nails. This process helps remove any shine and creates a slightly rough texture, which allows the gel polish to adhere better. Focus on the areas around the cuticle and the edges of the nails. You can also use a nail file or a drill for this step. Remember to brush away any dust created during this process.
Clean your nails: After buffing, use a Bluesky cleanser wipe or a brush to clean your nails. This step ensures that any remaining dust, debris, or oil residue is removed, providing a clean base for the gel polish.
Trim and shape your nails: If needed, trim your nails to your desired length and shape them using a nail file. You can opt for square, round, or any other shape that suits your preference.
Ensure dryness: Before applying the gel polish, make sure your nails are completely dry. Any moisture on the nail bed can affect the adhesion of the gel polish.
Apply a base coat: Once your nails are prepped, you can start by applying a thin layer of the Bluesky base coat to all five nails, being careful to avoid the skin and cuticle. Remember to cap the ends of your nails by sealing the edge of each nail with the brush, this helps prevent chipping. Cure the base coat under a UV or LED lamp for 60 to 90 seconds, following the instructions specific to your lamp.
Your nails are now ready for the application of Bluesky gel polish! Remember to follow the specific instructions provided with your Bluesky gel nail kit for the best results.
Gel X Nails: Safe Removal Techniques and Aftercare
You may want to see also
Explore related products
Applying the base coat
Now you are ready to apply the base coat. Apply a thin layer of Bluesky Base Coat to all five nails, making sure to cap the ends. Be careful to avoid the skin and cuticle. Cure for 60 seconds under the Bluesky Lamp. It is normal for your nails to still feel tacky after curing, as this allows the next coat to bond to the gel base.
If you are using a builder gel, apply this after the base coat. The builder gel will help strengthen your nails, but it is important to note that it will not improve the condition of your nails. Make sure to cure the builder gel for the correct time using the appropriate lamp to avoid causing allergies in the future if it is not cured properly.
Once you have applied and cured the base coat (and builder gel, if using), you are ready to move on to the colour coat. Remember to wipe any excess gel from the brush before applying strokes to your nails.
Acetone's Quick Gel Nail Removal: How Long Does It Take?
You may want to see also
Explore related products
Applying the colour gel
Now that your nails are prepped, it's time to apply the colour gel. Choose your favourite Bluesky colour and get ready to paint! Remember to keep your gel products away from direct sunlight as gel cures when exposed to light.
Start by applying a thin layer of your chosen colour gel polish to all five nails, making sure to cap the ends. Be careful to avoid your skin and cuticles. Wipe any excess gel with a brush before applying strokes. Cure the first layer under a UV/LED lamp for 60 seconds.
Next, apply a second thin layer of colour gel polish, again capping the ends and avoiding your skin. Cure this layer for another 60 seconds. If you feel like you need a third layer, go ahead and apply a third thin layer, curing for 60 seconds as before.
Your nails should now be cured and ready for the final steps. Remember, when applying the colour gel, it's important to work in thin layers and to cap the ends of your nails to seal the gel and prevent chipping.
If you're happy with the colour, you can move on to the top coat.
Acrylic Nails: Safe to Apply Gel on Skin?
You may want to see also
Explore related products
Applying the top coat
When applying the top coat to your Bluesky gel nails, there are a few important steps to follow to ensure a smooth and long-lasting finish. Here is a detailed guide:
Firstly, it is crucial to apply a thin layer of the top coat. A thin, even application is key to achieving the best results. Avoid applying too much of the top coat, as this can cause the gel to shrink and peel off. Use a Bluesky top coat specifically, as this is designed to work with the gel polish and ensure optimal adhesion.
Next, cure the top coat under a UV or LED lamp. The curing time may vary depending on the type of lamp you are using. For a UV lamp, cure for 90-120 seconds, and for an LED lamp, cure for 60-90 seconds. During this time, the gel will harden and set, providing a durable finish.
Once the top coat has been cured, it is time to remove any sticky residue. Use a Bluesky Cleanser Wipe to gently wipe away the tacky layer. This step will leave your nails with a super shiny and glossy appearance.
After removing the residue, take a moment to inspect your nails. Ensure that the top coat is smooth and even, and there are no smudges or imperfections. If you notice any areas that require touch-ups, carefully apply a small amount of the top coat to those specific areas and cure again.
Finally, allow your nails to dry completely. Bluesky gel nails are known for their quick-drying formula, but it is essential to give them enough time to set fully. Avoid any activities that may cause smudging or chipping, such as washing your hands or handling objects immediately after the application.
By following these steps for applying the top coat, you will achieve a professional-looking finish that will extend the wear time of your Bluesky gel manicure. Remember to seal the edges of your nails properly to prevent chipping and to always use the recommended curing times for the best results.
Gel Nails vs Acrylics: Cost Comparison and Benefits
You may want to see also
Explore related products
Removing the gel
Removing Bluesky gel nail polish is a simple process. Firstly, lightly buff the shine from the top of your nails using a nail buffer. This will help to break down the top layer of the gel polish, making it easier for the remover to penetrate. Next, soak a cotton ball or pad with nail gel remover and place it on top of each nail. Wrap your nails with aluminium foil or a nail wrap to secure the cotton in place and allow the remover to soak into the gel polish. Leave the remover to soak for a minimum of 15 minutes.
After the gel polish has been sufficiently soaked, it's time to remove the cotton and foil. Remove these one nail at a time and use a removal wand to gently push off the gel. The gel should come off easily without much effort. If you encounter any resistance, re-soak the cotton with remover, rewrap your finger, and allow it to soak for an additional 5 minutes. Once all the gel has been removed, buff your nails again to ensure that any remaining residue is gone and to smooth out your nails.
It is important to note that gel nail polish can be removed without the use of foil. If you do not have foil, simply follow the same steps and allow the remover to soak into the cotton for a longer period, such as 20-30 minutes. Additionally, always make sure to follow the instructions provided with your specific nail kit and remover, as different brands may have varying requirements for effective removal.
Gel Nail Kit Brush Application: A Step-by-Step Guide
You may want to see also
Frequently asked questions
First, remove the cuticle and shine from your nails with a file or a drill. Then, buff your nails with a Bluesky Nail Buffer to remove any remaining shine. Clean your nails with a Bluesky Cleanser Wipe to remove any dust and debris.
Apply a thin layer of Bluesky Base Coat to all five nails, avoiding the skin and cuticle. Cure for 60 seconds under a UV or LED lamp. Next, apply your chosen colour coat in the same way as the base coat and cure for 60 seconds. Finish with a layer of Bluesky Top Coat and cure for 60-90 seconds. Wipe off the tacky layer with a cleanser wipe for a high-gloss finish.
Lightly buff off the shine from the top of your nails using a nail buffer. Soak a cotton ball or pad with nail gel remover and place it on top of each nail. Wrap the nail with aluminium foil or a nail wrap and allow the remover to soak for a minimum of 15 minutes. Remove the cotton and foil, then gently push off the gel using a removal wand.
