Liam Carter
The KISS Brush-On Gel Nail Kit provides a super-strong, long-lasting, at-home gel manicure. The kit includes everything needed for two full manicures, including 24 French tips and 24 natural tips. The application process involves preparing the nails by pushing back cuticles, trimming, filing, and buffing. After selecting the correct-sized tips, the brush-on gel is applied to the nail, followed by the activator, and repeated for multiple coats if desired. The result is a smooth and shiny finish that dries within five minutes, with no UV light or curing time required.
Characteristics and Values Table for Brush-On Gel Nail Kit
| Characteristics | Values |
|---|---|
| Brand | KISS |
| Cost | $12-14 |
| Contents | 48 Easy-Apply Tips (24 Natural Tips, 24 French Tips), Brush-On Gel, Brush-On Activator |
| Drying Time | 5 minutes |
| Application | Apply a small amount of glue to the underside of the nail on the clear band, slightly overlapping the white part. |
| Removal | Use KISS Glue OFF, or soak nails in acetone-based polish remover until soft. |
| Durability | Lasts 3-5 days |
| Finish | Super strong, long-lasting, smooth, and shiny |
Explore related products
What You'll Learn
Preparing your nails
Protect Your Work Area: Start by covering your work surface with something disposable, like paper towels, newspaper, or a rag. This will help catch any mess and make clean-up easier.
Push Back Cuticles: Using a manicure stick, gently push back your cuticles on each nail. This will create a clean canvas for the gel application and ensure that your nails look neat and tidy.
Trim, File, and Shape: Trim your nails to your desired length using a nail clipper. Then, use a nail file to shape your nails. You can file them into various shapes, such as oval, square, or almond, depending on your preference. Filing your nails will also help smooth out any rough edges.
Buff Your Nails: Lightly buff the surface of your nails to remove the natural shine and create a slightly rough texture. This step is crucial as it helps the gel adhere better to your nails. Be careful not to over-buff, as excessive filing can thin and damage your nails.
Remove Dust and Clean Nails: After buffing, use a dusting brush to remove any nail dust. Then, wipe your nails with acetone polish remover to eliminate any remaining oils or residue. Ensure your nails are clean and dry before proceeding to the next step.
Select the Correct Size Tips: The brush-on gel nail kit comes with different sized nail tips. Choose the correct size tip for each of your nails, and lay them out in the order of your fingers. You may need to custom-fit some tips by filing the sides for a more accurate fit.
By following these steps, you will properly prepare your nails for the application of the brush-on gel nail kit. Remember to take your time and work carefully to achieve the best results.
Soaking Off Gel Nails: Hot Water Removal Method
You may want to see also
Explore related products
Applying the gel
Once you have applied all the tips, remove the Easy-Apply Tabs by gently bending them up and down (do not twist or rip them off). You may need to use the buffer to smooth out any bumpy or jagged edges left by the tabs. Next, use the brush from the brush cleaner, dip it into the activator, and apply a thin coat of activator over the wet gel on each nail.
After this, apply a second layer of brush-on gel and activator to each nail. For an opaquer look, you can apply a third layer. Finish with a thin layer of brush-on gel on all ten nails as you would a top coat. The gel will self-level and set to a hard, smooth, and shiny surface in under five minutes.
Gel Nails: Sun Curing Method, Does It Work?
You may want to see also
Explore related products
Using the activator
Prepare Your Nails
Before applying the gel and activator, ensure your nails are prepared correctly. Push back your cuticles with a manicure stick. Trim, file, and shape your nails to your desired length and shape. Lightly buff the nail surface to remove any shine and natural oils, which can affect adhesion. Remove any dust generated during the buffing process with a paper towel or cotton ball dipped in acetone.
Apply the Brush-On Gel
Select the correct-sized nail tip for each finger and set them aside in order. Apply a small amount of Brush-On Gel to the base of your nail, ensuring you avoid the skin and cuticle area. Apply the gel as you would a polish, in even layers.
Now, take the brush from the Brush Cleaner and dip it into the Activator solution. Apply a thin coat of Activator over the wet Brush-On Gel. Be sure to apply the Activator only to the areas where the Brush-On Gel was applied. Use gentle, even strokes, just as you would when applying nail polish. After applying the Activator, remember to wipe the brush on a paper towel and return it to the Brush Cleaner to keep it clean and soft.
Repeat for All Nails
Repeat the above steps for all ten nails. It is important to work quickly and efficiently, as the products dry fast.
Second Layer
Once you have applied the first layer of Brush-On Gel and Activator to all nails, it's time to apply a second layer. Repeat the same steps as before, adding a second layer of Brush-On Gel and then a second layer of Activator. For an opaquer look, you can apply a third layer of the Gel/Activator combination.
By following these steps and correctly using the activator, you will achieve a super-strong, long-lasting, smooth, and shiny manicure at home!
UV Rays and Your Gel Manicure: What's the Deal?
You may want to see also
Explore related products
Removing the tabs
Prepare Your Nails:
Before you begin, gather the necessary tools, including a nail file, buffer, acetone, and a wooden stick or cuticle stick. Protect your work surface with paper towels, a rag, or newspaper to catch any mess.
Soak Your Nails:
Soak your nails in warm soapy water for about 5 minutes to loosen the adhesive. If you used liquid glue, soak your nails for a longer period, between 10 and 15 minutes. This will help soften the glue and make the removal process easier.
Remove the Tabs:
Starting at the top of the nail, use your finger or a wooden stick to gently lift and roll the tab down towards the tip of your nail. Do not twist or pull the tabs off forcefully. Work slowly and carefully to avoid damaging your natural nails. If the tab is not coming off easily, soak your nails in the warm soapy water for a few more minutes before trying again.
Smooth the Edge:
Once the tabs are removed, you may have a bumpy or jagged edge where the tabs were attached. Use a nail file or buffer to gently smooth out this area. Buff the entire nail surface to create a uniform texture and remove any remaining glue residue.
Moisturize:
After removing the tabs and smoothing your nails, it is important to moisturize your nails and cuticles. Apply cuticle oil or a rich hand cream to nourish and protect your nails.
Remember, it is essential to take your time and be gentle during the removal process to avoid damaging your natural nails. By following these steps, you can safely remove the tabs from your brush-on gel nail kit and maintain the health of your nails.
Builder Gel and Acrylic Nails: Can You Combine Them?
You may want to see also
Explore related products
Finishing and maintenance
Once you have applied the Brush-on Gel and Activator to all ten nails, finish with a thin layer of Brush-on Gel on all nails as you would with a top coat. The brush-on gel products will self-level and set to a hard, smooth, and shiny surface in under five minutes. You can enjoy your manicure as is, or finish with your own nail polish for a different colour.
To remove the gel nails, do not force or pull them off. Trim off as much of the artificial tip as possible. For quick and easy removal, use an acetone-based polish remover, or a product like KISS Glue OFF. Soak your nails in the remover until they are soft. Then, wipe off the softened overlay and glue; repeat this process as necessary.
To maintain your brush-on gel nails, be mindful of how long you keep them on for. Typically, these nails will only last around three to five days and are recommended for special occasions or vacations. You can also use the Gel/Activator combination on your toenails for a fast, fresh pedicure.
The Magic of Opi Gel Nail Polish
You may want to see also
Frequently asked questions
First, protect your work surface with paper towels, a rag, or newspaper. Then, push back cuticles with a manicure stick. Trim and file nails, and lightly buff the nail surface to remove surface shine and any natural oils. Remove dust with acetone.
Pick out a tip that best fits each nail. You may need to customise the size by filing the sides. Apply a small amount of brush-on gel glue to the underside of the nail tip, then slowly lower the tip onto your natural nail, applying firm pressure for about 30 seconds.
Remove the Easy-Apply Tabs by gently bending them up and down. Do not twist or rip them off. File your nails to the desired shape and wipe off any dust.
Set up your three bottles in order. Avoiding the skin and cuticle area, apply an even layer of Brush-on Gel to one nail as you would nail polish. Next, dip the brush into the Activator and apply a thin coat of Activator over the wet gel. Repeat these steps for all ten nails, adding a second layer of both the Gel and Activator. For an opaquer look, apply a third layer.
Finish with a thin layer of Brush-on Gel on all ten nails as you would a top coat. The gel will self-level and set to a hard, smooth, and shiny surface in under 5 minutes.
