Ava Monroe
Ohora's semi-cured gel nail strips are a convenient and affordable way to get salon-quality gel manicures at home. The triple-layered strips are flexible and can be stretched and shaped to fit your nail size and shape. The application process is simple and beginner-friendly, involving cleaning the nail surface, applying the strips, and curing them with a UV lamp. The strips are also easy to remove, making them a hassle-free alternative to salon manicures. With a wide range of colours and styles available, Ohora gel nails offer a convenient and stylish option for those who want to avoid the salon.
How to Apply Ohora Gel Nails
| Characteristics | Values |
|---|---|
| Step 1 | Clean nail surface: Wash hands and remove oil and moisture from the nail surface with a prep pad. |
| Step 2 | Soak nails for a few minutes, use Ohora Loose Skin Remover, push cuticles, and remove excess skin. |
| Step 3 | Lightly rough up the surface of the nail bed with a 3-way sanding block. |
| Step 4 | Apply a protection strip before the gem strip. |
| Step 5 | Firmly press on the gem strip, ensuring no air bubbles are trapped between the strip and your nail. |
| Step 6 | Cure the semi-cured gel nail strips 2-3 times with Ohora's UV Gel Lamp. |
| Step 7 | If you feel the strips require additional curing, do so 2-3 more times. |
| Tip | If you can't find a strip that fits your nail size, choose a strip that is slightly smaller and gently stretch it to fit your nail. |
| Tip | Before application, ensure to remove any moisture or oils from both your fingertips and nails using the provided prep pad. |
Explore related products
What You'll Learn
Preparing your nails
Firstly, ensure your nails are clean and dry. Wash your hands to remove any oil, sweat, moisture, or hand cream from your nail surface. This step is important for optimal adhesion of the gel nail strips. You can use the prep pad provided in the Ohora kit to clean your nails.
Next, soak your nails in water for a few minutes. This will help soften your cuticles and nails, making them easier to work with. After soaking, gently push back your cuticles using a cuticle pusher or orangewood stick. If you have excess cuticle skin, carefully trim it with cuticle nippers or scissors. Be careful not to cut live skin as this can be painful and lead to infection.
Once your cuticles are pushed back, lightly rough up the surface of your nail bed using a nail file or buffer. This step will create a slightly uneven surface for better adhesion. Be careful not to over-file your nails as this can weaken them and lead to peeling or breakage.
If you have long nails, you may need to trim and file them to your desired length and shape. Ohora gel nail strips are flexible and can be stretched and shaped to fit various nail shapes and sizes. However, starting with a suitable nail length and shape will make the application process easier.
Finally, ensure your nails are completely dry before applying the gel nail strips. You can use a hairdryer on a cool setting to speed up the drying process, but make sure your nails are thoroughly dried to prevent any moisture from affecting the adhesion of the gel strips.
Using Clear Gel on Kiss Nails: Is it Possible?
You may want to see also
Explore related products
Sizing the strips
Firstly, ensure your nail surface is clean and dry. Use a prep pad to remove any oil or moisture from your nail bed. You can also use an alcohol prep pad and allow it to dry. This step is crucial for optimal adhesion of the gel strips.
Next, select a strip that is slightly smaller than your nail. You can then gently stretch it to fit your nail size and shape. A useful tip is to roughly estimate how much longer the strip is than your nail and cut off the excess with a nail clipper before placing it on your nail. This will make the filing process easier, and remember to file in one direction for the best results.
Once you have the correct strip size, press it down firmly onto your nail. Use a wooden stick to press down on the edges and ensure there are no air bubbles trapped between the strip and your nail.
If you are using gem strips, you can apply a protection strip first. The protection strip does not need to perfectly fit your nails, but it will provide an extra layer of security.
Gel Nails: Recovery Time and Aftercare for Healthy Nails
You may want to see also
Explore related products
Applying the strips
Before applying the strips, it is important to prepare your nails. Wash your hands and clean your nails with a prep pad to remove any sweat, moisture, oil, or hand cream. You can also use an alcohol prep pad. Then, soak your nails for a few minutes, use a cuticle remover to push back your cuticles, and remove any excess skin. You can also use a nail clipper to cut your nails to your desired length.
Now, you are ready to apply the strips. First, find the strip that best fits your nail size. If none of the strips fit your nail perfectly, choose a strip that is slightly smaller than your nail and gently stretch it to fit. You can also cut off an adequate chunk of the strip before placing it onto your nail to make the filing process easier. Then, place the strip onto your nail, leaving a subtle gap from the cuticle line to prevent lifting. Press down on the strip from all sides, making sure that there are no air bubbles trapped between the strip and your nail. You can use a wooden stick or an orange stick to press down on the edges of the strip.
To ensure that the strips adhere securely, you can lightly brush acetone along the cuticle edge and press again. The acetone will help to seal the strip by thinning out and spreading/blending the existing top coat. Finally, cure your strips 2-3 times with a UV/LED lamp to complete the curing process and minimize the risk of chipping. If you feel that the strips require additional curing, you can cure them for 2-3 more times. However, note that over-curing the strips may cause early chipping and cracking.
LED Gel Nail Polish: How Does It Work?
You may want to see also
Explore related products
Curing the strips
Before initiating the curing process, ensure that your nail surface is clean and dry. Use the provided prep pad to remove any moisture or oils from your fingernails and fingertips. This step is essential for optimal adhesion of the gel nail strips. Additionally, it is recommended to soak your nails for a few minutes and use a cuticle pusher to remove any excess skin around the nails.
Now, let's begin the curing process. First, apply the gel nail strips by choosing a strip that is slightly smaller than your nail. Stretch the strip gently to fit your nail shape and size. Ohora's gel nail strips are triple-layered and semi-cured, allowing them to be flexible and easily shaped. Once the strips are applied, it's time to cure them using a UV/LED lamp. Cure the strips 2-3 times with Ohora's UV Gel Lamp or any other UV/LED lamp. If you feel that additional curing is required, you can cure the strips for another 2-3 times. However, be cautious not to over-cure the strips, as it may result in early chipping and cracking.
To enhance the durability of your gel nails, consider applying a top coat. Ohora offers the Pro Glossy Top Gel, which can be applied over the cured gel strips and cured again to fully coat the surface. This will provide an extra layer of protection and a glossy finish. Additionally, the top coat can help prevent hair from getting snagged in your nails, ensuring a smooth and flawless manicure.
Remember, the key to successful curing is following the recommended number of curing sessions and avoiding over-curing. By curing the strips adequately, you will achieve long-lasting, salon-quality gel nails that you can proudly show off. Enjoy your gorgeous new manicure, courtesy of Ohora gel nail strips!
Gel Nails Turning Yellow: Why and How to Prevent It
You may want to see also
Explore related products
Removing the strips
To begin the removal process, soak your nails in warm water for a few minutes to loosen the strips. Then, use the orange stick to gently lift the edges of the strips. If you do not have an orange stick, you can use your fingernails to peel off the strips. However, it is important to note that nail experts advise against this method as it can potentially damage your nails.
Once you have lifted the edges of the strips, continue to gently pull them off your nails. Be careful not to pull too forcefully, as this may cause damage to your natural nails. If you find that the strips are difficult to remove, you can try soaking your nails in warm water for a little longer to soften the adhesive.
After removing the strips, it is important to clean your nails and prepare them for the next application. Use a prep pad to remove any remaining adhesive or residue from your nails. Ensure that your nails are completely clean and dry before proceeding with the next set of gel strips.
The Art of Applying Bio Gel Nails
You may want to see also
Frequently asked questions
First, clean your nails with a prep pad to remove any oil or moisture. Then, soak your nails for a few minutes, use a cuticle remover, and push back your cuticles. Next, stretch the gel nail strip to fit your nail and apply it. Firmly press on the strip with a wooden stick to secure it in place. Finally, cure your nails 2-3 times with Ohora's UV Gel Lamp.
Ohora gel nails can last up to 2 weeks.
To remove Ohora gel nails, use the Ohora Easy Peel Remover or gently pry the colour free from your nail with an orange stick.
To prevent hair from getting snagged, apply the Ohora Pro Glossy Top Gel over the gel strips and cure it to fully coat the surface.
You can buy Ohora gel nails from their website, their shop on Amazon, or Vanity Table.
