Using Clear Gel On Kiss Nails: Is It Possible?

can i put clear gel on my kiss nails

Kiss Brush-On Gel Nails are artificial nails that can be applied at home and are said to provide a super-strong, long-lasting manicure. The kit includes gel glue, which is similar to nail glue but thicker, and is applied like nail polish. The nails are said to last for up to 14 days and can be removed with KISS Glue Off or by soaking them in acetone-based polish remover. While some people have expressed concerns about the potential damage caused by glue-on nails, others have experimented with applying a gel base coat and top coat to their natural nails before gluing on the artificial nails, reporting no lifting and a strong hold.

Can I put clear gel on my kiss nails?

Characteristics Values
Can I use gel on press-on nails? Yes, you can use gel on press-on nails.
How to apply gel to press-on nails? File, trim, and buff your nails. Choose a press-on that is sheer enough in colour so that light can pass through. Apply gel to the underside of the nail and press it onto your natural nail. Cure the gel under an LED or UV light for 30-60 seconds.
How long do gel press-on nails last? Gel press-on nails can last anywhere from 3 to 14 days.
Are there any risks associated with gel curing press-on nails? Yes, it is important to ensure that the nail is properly cleaned with alcohol and free of any bubbles during the curing process to avoid potential infections. Uncured gel left on the surface of your nail can also cause an allergic reaction.
Can I use glue to attach press-on nails after applying a gel base coat to my natural nails? Yes, you can apply a gel base coat and top coat to your natural nails, lightly buff them, and then glue on the press-on nails. This method provides a strong hold and prevents lifting.
Can I use gel glue to attach press-on nails? No, you cannot use gel glue to attach press-on nails. Regular nail glue or a brush-on gel glue is recommended.

nailicy

Kiss Brush-On Gel Nail Kit

The KISS Brush-On Gel Nail Kit provides a super-strong, long-lasting, at-home gel manicure with a unique gel formula that can be brushed on for a smooth and shiny finish without buffing. The kit includes 48 nail tips with two options: a permanent French finish tip or a natural colour tip that can be worn as is or with added colour gel or nail polish. The kit also includes brush-on gel glue, a brush-on gel activator, a brush cleaner, a mini file, a manicure stick, and a replacement gel brush.

To use the KISS Brush-On Gel Nail Kit, first prepare your nails by pushing back cuticles with a manicure stick, trimming and filing nails, and lightly buffing the nail surface to remove the surface shine. Then, select the correct size tip for each finger and lay them out in order of your fingers. You may need to customise the tips by filing the sides. Apply the brush-on gel to the back well area of the nail tip (the part that adheres to the natural nail) and slowly lower the tip onto your natural nail, holding it firmly until it sets. Repeat this process for the rest of your nails. To blend the tip with your natural nail, apply and hold the wet brush from the brush cleaner along the seam of each tip.

For the seam of the half-cover tips, you will need to carefully buff the clear part with the pink buffer. Be careful not to overdo this step, as you can scuff up the nail tip. Once buffed, use a brush to clean off the dust, but do not use acetone or you will ruin the nail tip and glue. Apply a coat of the brush-on gel activator to the seams, followed by two coats of gel glue and activator.

To remove the nails, do not force or pull them off. Trim off as much of the artificial tip as possible. For quick and easy removal, use KISS Glue OFF or soak your nails in an acetone-based polish remover until they are soft. Then, wipe off the softened overlay and glue and repeat the process as needed.

nailicy

Preparing your nails

Start by gathering the necessary tools, such as a nail file or buffer block, cuticle pusher or nipper, alcohol wipes or cotton pads, and a quality nail glue like the Kiss PowerFlex. These tools will help you shape, clean, and prepare your nails for the application process.

Clean and dry your nails thoroughly. Use alcohol wipes or cotton pads to ensure your nail beds are free of any oils or residue. This step is important as it helps the glue or gel adhere better to your natural nails.

Gently push back your cuticles using a manicure stick or cuticle pusher. Take care not to cut or damage your cuticles, as this can be painful and lead to infections.

Trim and file your nails to your desired shape and length. If you are using artificial nail tips, you may need to customise the size by filing the sides for a perfect fit. Ensure that the tips do not overlap onto your skin.

Lightly buff the surface of your nails. This step helps remove the natural shine and any remaining oils. It also provides a slightly rough surface for better adhesion. Be careful not to over-buff, as excessive filing can damage your natural nails.

Once you have completed these steps, your nails are ready for the application of clear gel or nail glue. Remember to always follow the manufacturer's instructions and take your time during the application process for the best results.

nailicy

Applying the gel

Preparing the Nails:

First, prepare your nails by following your usual nail care routine up until the point of nail polish application. This includes trimming, filing, and shaping your nails to your desired length and shape. Push back your cuticles with a manicure stick, and then gently buff the surface of your nails with a nail file or buffer. Buffing helps remove the natural shine and ensures that there are no natural oils on the nail, providing a better grip for the gel and nails.

Selecting the Correct Size:

Next, select the correct size tip for each nail. Kiss nails are typically numbered for size, so choose the best fit for each finger and set them aside in order. If needed, you can customise the size by filing or cutting the sides of the tips. Ensure that the tips do not overlap onto your skin.

Now, it's time to apply the gel. The Kiss Brush-On Gel Nail Kit includes a brush-on gel that you apply to the back well area of the nail tip—the part that adheres to your natural nail. Take care to apply a small amount of gel, avoiding excess that may ooze out. Slowly lower the tip onto your natural nail and hold it firmly for about 30 seconds. You can use a combination of pressing the centre and pinching the edges. Start with your pinky and work your way up to your thumb for convenience.

Removing Tabs:

Once the tips are glued on, gently remove the tabs by bending them up and down, being careful not to twist or pull them off forcefully. You may encounter bumpy or jagged edges where the tabs were, which you can address by gently filing or buffing.

Applying Activator and Additional Gel Layers:

After all the tips are glued on, you can apply a coat of Brush-On Gel Activator to the seams. Some users recommend applying two coats of gel glue and activator, while others suggest four coats to prevent cracking. Then, apply an even layer of Brush-On Gel to each nail, just as you would with nail polish. Remember to avoid the skin and cuticle areas.

Using Activator and Finalising:

Dip the brush from the Brush Cleaner into the Activator, and apply a thin coat of Activator over the wet gel, similar to how you would apply nail polish. Repeat this process on all ten nails. For added opacity, you can apply a second or third layer of the Gel/Activator combination. Finish by applying a thin layer of Brush-On Gel to all ten nails as you would a top coat.

Curing the Gel:

If you are using gel curing, you will need to cure the gel under an LED or UV light. Hold your nails under the light for 30 to 60 seconds to ensure proper curing. This step helps to secure the nails and provides a stronger grip than traditional nail glue.

Remember to follow the specific instructions provided with your Kiss Brush-On Gel Nail Kit and take your time during the application process for the best results.

nailicy

Removing the gel nails

Removing gel nails can be tricky, and it is recommended to have a full understanding of the type of gel applied to your nails. Hard gels, for example, cannot be soaked off and must be filed off, ideally by a professional manicurist.

If you are removing gel nail polish yourself, it is best to let your nails grow out and then clip them once a week. This helps to prevent damage to your nails, which can occur if you pick or scrape off the polish.

If you are removing a gel nail kit, such as the Kiss Brush-On Gel Nail Kit, you should first trim off as much of the artificial tip as possible. Then, you can use an acetone-based polish remover to remove the remaining nail. Soak a small piece of cotton in the remover and place it on the nail, wrapping it with plastic food wrap to create a tight seal. Leave this on for around 10 minutes before removing the wrap, and then gently rub off any remaining polish with a wet washcloth.

It is important to be cautious when using acetone, as it can irritate and damage the skin. To avoid this, you can apply petroleum jelly to the skin around your nails before starting the removal process.

Poly Gel Nails: How Long Do They Last?

You may want to see also

nailicy

Gel curing

Before curing, it's important to prepare your nails by cleaning them thoroughly, pushing back the cuticles, and buffing the nail surface to create a smooth canvas. You can then apply a thin layer of a gel base coat and place your nails under the UV or LED lamp to cure. After the base coat has cured, you can apply a thin layer of gel colour polish and cure again. If you want a more vibrant colour, you may need to apply two coats of colour, curing each layer as you go.

Once you are happy with the opacity of the colour, you can apply a thin layer of the top coat, which seals the free edge to prevent chipping. Cure the top coat under the lamp, and your gel manicure is complete!

It's important to note that curing gel polish requires some training and practice to master. It's also crucial to follow the manufacturer's instructions for the specific product you are using, as curing times can vary. Additionally, to ensure your safety, avoid running your UV lamp for more than 10 minutes when working on both hands.

If you don't have access to a UV or LED lamp, there are alternative ways to cure gel polish. You can use a non-UV gel nail polish, which dries on its own without the need for a lamp. These polishes provide a similar look and durability to gel manicures but are not technically cured. To speed up the drying process, apply thin, even coats and consider using a quick-drying nail polish spray or submerging your nails in ice water for about 3 minutes.

Frequently asked questions

Yes, you can put clear gel on your Kiss Nails. The Kiss Brush-On Gel Nail Kit includes a brush-on gel that you can apply to your nails like nail polish. You can also use gel curing, a method that involves using soft gel and an LED or UV light, to make your press-on nails last longer.

First, prepare your nails by filing, trimming, and buffing them. Then, select the correct nail size for each finger and set them aside in order. Apply a small amount of glue to the underside of the nail on the clear band, slightly overlapping the white part. Press the tip onto your natural nail with firm pressure for about 30 seconds, and repeat for all nails. Once the tips are glued on, remove the tabs gently by bending them up and down. Finally, apply a coat of Brush-On Gel Activator to the seams, followed by two coats of gel glue and activator.

The Kiss Brush-On Gel Nail Kit provides a super strong, long-lasting manicure that can last up to 7-14 days. It offers a smooth and shiny finish without the need for extensive buffing. The brush-on gel glue is easy to apply and provides a secure hold for your nails.

Written by
Reviewed by

Explore related products

Share this post
Print
Did this article help you?

Leave a comment