Liam Carter
Gelous Advanced Nail Gel Coat is a keratin-rich product that strengthens and fortifies nails, giving them a thicker, glossier appearance. It can be used as a base coat, top coat, or both, and is applied in the same way as regular nail polish. When paired with a UV/LED Gel Nail Lamp, the Gelous Gel Nail Polish cures within 60 seconds, resulting in a long-lasting, chip-resistant manicure that can be achieved at home. The product is cruelty-free, vegan, non-toxic, and affordable, making it a popular choice for those seeking a salon-quality manicure without the time or cost.
| Characteristics | Values |
|---|---|
| Application Process | Apply a thin layer of Gelous Advanced Nail Gel Coat as a base coat. |
| Apply a thin layer of nail polish. | |
| Repeat the Gelous layer, keeping it thin and letting it dry for one minute. | |
| Apply another thin layer of nail polish and let it dry. | |
| Finish with a top coat layer. | |
| Cure each layer under a UV/LED Gel Nail Lamp for 60 seconds. | |
| Seal the ends of each layer by pulling the brush down over the tips of the nails. | |
| Results | Long-lasting manicure, up to two weeks without chipping, fading, or peeling. |
| Thickens and strengthens nails, making them look shiny and glossy. | |
| Provides a smooth, glass-like, and hardened finish. | |
| Dries quickly. | |
| Affordable and cruelty-free. |
Explore related products
What You'll Learn
Prep nails
Preparing your nails is the first step to achieving a long-lasting manicure. Before you begin, make sure you have everything you need, including a nail buffer, nail polish remover, your choice of nail polish, a top coat, and Gelous Nail Gel.
Firstly, if you are wearing nail polish, remove it with nail polish remover. Then, prepare your nails by buffing the surface of each nail with a nail buffer to remove the shine. This step is important as it creates a rough texture for the gel to stick to. Next, clean your nails by swiping away nail dust and natural oils with another round of nail polish remover.
Now, you are ready to apply a layer of Gelous Nail Gel. Remember to apply this coat thinly and then sit tight for one minute. With each layer of gel and polish, pull the brush down over the tip of the nails to seal the ends. After the minute is up, apply a thin coat of your chosen nail polish. Wait three minutes before moving on.
Finally, repeat the Gelous layer, keeping it thin, and let it dry for another minute. You can then apply another thin layer of colour and give it one minute to dry.
Chlorine's Effect on Gel Nails: Longevity and Care Tips
You may want to see also
Explore related products
$9.24 $12.99
Apply a thin base coat
To apply a thin base coat of Gelous Advanced Nail Gel, start by prepping your nails. Remove any existing nail polish with nail polish remover, and use a nail buffer to prepare your nails by removing the shine and creating a bit of texture for the gel to stick to. You can then swipe your nails with nail polish remover again to clean them and remove any dust or natural oils.
Next, apply a thin layer of Gelous Nail Gel. This base coat should be thin and will help the polish stay on longer without chipping by bonding to your nail and providing a strong, durable layer of protection. After applying it, wait for about a minute. With each layer of gel, pull the brush down over the tip of the nails to seal the ends.
The Gelous Nail Gel contains keratin, a strengthening protein that will fortify and build up your nails, making them healthier and stronger. It will also add thickness and create a smooth glass-like finish.
The Longevity of Gel Polish: How Long Does It Last?
You may want to see also
Explore related products
Add colour
The colour coat is what will make your manicure truly shine and stand out. You can use any nail polish of your choice. However, make sure that the colour coat is compatible with the base coat and top coat you are using. For instance, the Gelous Gel Nail Polish is designed to be used with the Gelous UV/LED Gel Nail Lamp.
Apply 2-3 layers of colour coat. Each layer should be thin and given time to dry before moving on to the next layer. You can also add any decorations or stencilling to your nails at this stage. If you need to apply a second layer of polish, wait for the first layer to dry before adding any decorations or details.
If you are using Gelous Gel Nail Polish, you can cure each layer of colour coat in 60 seconds under the Gelous UV/LED Lamp. The Gelous Gel Nail Lamp features 30 dual-wave LEDs lasting up to 50,000 hours, ensuring quick and efficient drying. Notably, these LEDs are safer and quicker than UV bulbs, as they operate at 365-405nm, designed to align with Gelous Gel Polish curing requirements.
Once you have applied your colour coats, you can move on to the final step of applying the top coat.
Nail Builder Gel: Mastering the Art of Perfect Nails
You may want to see also
Explore related products
Seal with a top coat
The final step to achieving a long-lasting manicure is to seal your nail art with a top coat. After applying the colour coat, wait for it to dry before adding the top coat. The top coat acts as a protective layer, preventing chipping and extending the lifespan of your manicure.
When choosing a top coat, opt for one that is specifically designed for gel nails, such as the INM Out the Door Fast Drying Top Coat or the Seche Vite Fast Dry Top Coat. These top coats are known for their quick drying time and ability to enhance the durability of your nail art.
Apply the top coat evenly across your nails, ensuring that you cover the tips of your nails as well. This technique, known as "sealing the tip," will further protect your manicure and give it a sleek finish.
The Gelous Advanced Nail Gel Coat itself can also be used as a top coat. Its keratin-rich formula will add thickness and create a barrier that protects your nails from chipping and external damage. However, some users have reported that the product works better as a base coat than a top coat, so you may need to experiment to see which method works best for you.
By following these steps and sealing your nail art with a top coat, you can achieve a professional-looking manicure that is both long-lasting and visually appealing.
Gel Nail Polish: Where to Buy the Best Brands
You may want to see also
Explore related products
Cure under a UV/LED lamp
Curing your nails under a UV/LED lamp is an essential step in achieving the perfect manicure. The Gelous UV/LED Gel Nail Lamp is designed to be used with the Gelous Base Coat, Colour Coat, and Top Coat for optimal results. The lamp operates at a wavelength of 365-405nm, which is the curing requirement for Gelous Gel Polishes.
Before curing, ensure your nails are thoroughly prepped. Start by gently buffing your nails to create a dull, slightly rough surface. Remember, you are trying to roughen your nails, not smooth them. Pay close attention to the sides of the nails and the area around the cuticle, as improper buffing in these areas can lead to lifting. After buffing, clean your nails with a lint-free wipe soaked in nail polish remover. This step is crucial, as any residual dust, oil, or contaminants will reduce the adhesion of the gel and affect the longevity of your manicure.
Once your nails are prepped, you can begin the application process. Apply the Gelous Base Coat, followed by the optional Builder Gel, then 2-3 coats of Gelous Colour, and finish with the Gelous Top Coat. After applying each layer, cure your nails under the UV/LED lamp for 60 seconds. The lamp will seal and harden the gel nail polish, transforming it from a liquid gel to a hard, durable, and glossy coating.
It is important to note that the Gelous UV/LED Gel Nail Lamp is specifically designed for use with Gelous products. Using different brands of polishes or lamps together may result in incompatibility and under-curing, which can cause damage to your nails.
The Ultimate Manicure: SNS vs Gel Nails
You may want to see also
Frequently asked questions
Gelous Advanced Nail Gel Coat is a base coat for nail polish. It is applied like ordinary nail polish but lasts over two weeks without fading, peeling or chipping. Start by prepping your nails, then apply a thin layer of the base coat, followed by an optional builder gel layer, 2-3 layers of colour coat, and finally a top coat layer.
Each layer of the Gelous Advanced Nail Gel Coat takes about a minute to dry. The entire process takes about 20 minutes.
The INM Out the Door Fast Drying Top Coat pairs nicely with the Gelous Advanced Nail Gel Coat.
The Gelous Advanced Nail Gel Coat can last up to two weeks without chipping.
Yes, Gelous Advanced Nail Gel Coat can be used as a clear coat on its own or over colour.
