Caleb Foster
The degree number of a siding nail gun refers to the angle of the magazine, which holds the nails. The degree number can vary from 15 to 34 degrees, with the most common angles being 15, 21 and 28 degrees. The degree number affects the type of nail collation and the number of nails the nail gun can hold. For example, 15-degree nail guns can hold a large number of full-round-head nails, which are often required for framing by building codes. On the other hand, 28-degree nail guns hold offset-head or clipped-head nails, which save space in the magazine, making the tool more compact.
| Characteristics | Values |
|---|---|
| Degree number | 15, 21, 28, 34 |
| What the degree number refers to | The nail collation and the angle of the magazine |
| Whether the degree number affects the angle at which nails are driven | No, nails are driven straight or perpendicularly into a surface |
| Whether the degree number affects the type of nail used | Yes, for example, 15-degree nail guns use full-round-head nails, 28-degree nail guns use offset-head or clipped-head nails, and 90-degree nail guns use plastic coil nails |
| Whether the degree number affects the number of nails held | Yes, for example, 15-degree nail guns hold more nails than 21-degree nail guns |
| Whether the degree number affects the weight of the nail gun | Yes, for example, 15-degree nail guns are heavier than 21-degree nail guns |
Explore related products
What You'll Learn
- The degree number refers to the nail collation and the angle of the magazine
- The degree number you need may depend on your project's location
- degree nail guns can hold a large number of full-round-head nails
- degree nail guns hold fewer nails but are lighter and easier to use in tight corners
- degree nail guns hold offset-head or clipped-head nails to save space in the magazine
The degree number refers to the nail collation and the angle of the magazine
The degree number on a siding nail gun refers to the nail collation and the angle of the magazine. The angle degree does not refer to the slant that the nail is driven, as nails are driven straight or perpendicularly into a surface. The degree number can vary depending on the manufacturer, but typically falls between 20 and 22 degrees.
The nail collation is the way in which the nails are held together. For example, 15-degree nail guns are wire-coil collated, meaning their nails are held together by two thin wire strips and slanted at a 15-degree angle. The nails themselves have a fully round head, which is often required for framing by building codes. 15-degree nail guns can hold a large number of full-round-head nails, which are ideal for floor joists, wall studs and other framing jobs. However, they can be heavy, making overhead work difficult.
A 21-degree nail gun also accommodates full-round-head nails but holds fewer nails than a 15-degree nail gun. The greater angle makes tight corners easier to access. Because they hold fewer nails, 21-degree nail guns are typically lighter than 15-degree nail guns.
The degree number you need may depend on the geographic location of your project.
Understanding Nail Health: Lines and Ridges Explained
You may want to see also
Explore related products
The degree number you need may depend on your project's location
The degree number of a nail gun refers to the nail collation and the angle of the magazine. The degree number you need may depend on the geographic location of your project. For example, 15-degree nail guns can hold a large number of full-round-head nails, which are ideal for floor joists, wall studs and other framing jobs. However, they can be heavy, making overhead work difficult. 21-degree nail guns also accommodate full-round-head nails, but hold fewer nails than 15-degree nail guns. The greater angle makes tight corners easier to access. 28-degree nail guns hold offset-head or clipped-head nails to save space in the magazine. They are a more compact tool than the previous angled nail guns, but not all building codes allow the use of offset-head or clipped-head nails in framing jobs.
White Toenails: What Does It Mean?
You may want to see also
Explore related products
15-degree nail guns can hold a large number of full-round-head nails
The angle degree of a nail gun refers to the nail collation and the angle of the magazine, not the slant that the nail is driven. 15-degree nail guns can hold a large number of full-round-head nails, which are ideal for floor joists, wall studs and other framing jobs. Full-round-head nails are often required for framing by building codes. 15-degree nail guns can be heavy, making overhead work difficult.
The 15-degree nail gun drives nails with a fully round head and the collation is circular in shape. The nails are held together by two thin wire strips and slanted at a 15-degree angle. The main benefit of the 15-degree nail gun is that it can access floor joists, wall studs, and the tight corners often found in framing applications.
The 21-degree nail gun also accommodates full-round-head nails, but holds fewer than the 15-degree nail gun. The greater angle makes tight corners easier to access. Because they hold fewer nails, 21-degree nail guns are typically lighter than 15-degree nail guns.
The 28-degree nail gun holds offset-head or clipped-head nails to save space in the magazine. They are a more compact tool than the previous angled nail guns, but not all building codes allow the use of offset-head or clipped-head nails in framing jobs.
Black Lines Under Nails: What's the Underlying Health Concern?
You may want to see also
Explore related products
21-degree nail guns hold fewer nails but are lighter and easier to use in tight corners
The angle degree of a nail gun refers to the nail collation and the angle of the magazine, not the slant that the nail is driven. The nail collation is the way in which the nails are held together. 21-degree nail guns hold fewer nails than 15-degree nail guns. This is because the nails are held together by a plastic strip, rather than a wire coil. The greater angle of 21-degree nail guns makes them lighter and easier to use in tight corners. This is because their increased magazine angle gives better access to tight spaces. However, this means that 21-degree nail guns require more reloads than 15-degree nail guns.
White Toenails: What Do They Mean?
You may want to see also
Explore related products
28-degree nail guns hold offset-head or clipped-head nails to save space in the magazine
The angle degree of a nail gun refers to the nail collation and the angle of the magazine, not the slant that the nail is driven. Nails are driven straight or perpendicularly into a surface. The angle of a nail gun magazine typically varies between 20 and 22 degrees, depending on the manufacturer.
The 28-degree nail gun holds offset-head or clipped-head nails to save space in the magazine. They are more compact than previous angled nail guns, but not all building codes allow the use of offset-head or clipped-head nails in framing jobs.
The 15-degree nail gun can hold a large number of full-round-head nails, which are ideal for floor joists, wall studs and other framing jobs. Full-round-head nails are often required for framing by building codes. However, 15-degree nail guns can be heavy, making overhead work difficult.
The 21-degree nail gun also accommodates full-round-head nails but holds fewer nails than the 15-degree nail gun. The greater angle makes tight corners easier to access. Because they hold fewer nails, 21-degree nail guns are typically lighter than 15-degree nail guns.
Black Fingernails: What's the Meaning Behind This Trend?
You may want to see also
Frequently asked questions
The degree number refers to the nail collation and the angle of the magazine, not the slant that the nail is driven.
15-degree nail guns can hold a large number of full-round-head nails, which are ideal for floor joists, wall studs and other framing jobs. 21-degree nail guns also accommodate full-round-head nails, but hold fewer nails. The greater angle makes tight corners easier to access.
28-degree nail guns hold offset-head or clipped-head nails to save space in the magazine. They are more compact than 21-degree nail guns, but not all building codes allow the use of offset-head or clipped-head nails in framing jobs.
