Sophia Delgado
The JEWHITENY Poly Extension Gel Nail Kit is an all-in-one nail art starter kit that comes with 14 colours of poly gel, a 6W mini nail lamp, nail water, and other nail tools. The kit is suitable for all seasons and can be used on both finger and toenails. The formula is non-toxic, safe, easy to dry, and long-lasting. Before using the kit, it is important to read the instructions carefully. This article will provide a step-by-step guide on how to use the JEWHITENY Poly Extension Gel Nail Kit to achieve beautiful and long-lasting nail art.
| Characteristics | Values |
|---|---|
| Number of colours | 14 |
| Compatibility | Compatible with all kinds of gel nail polish |
| Curing | Cured under UV/LED lamp |
| Durability | Lasts for at least 20 days |
| Ease of use | Easy to apply |
| Included items | Top coat, base coat, matte coat, nail file, nail lamp, nail clips, brush, slip solution, gel nail polish, glitter flakes, removal wipes, gel scooper tool |
Explore related products
What You'll Learn
Preparing your natural nails
Firstly, gently clean your natural nails. Remove any dead skin and cuticles surrounding the nails. It is important to start with a clean and smooth surface. You can use a gentle nail polish remover or a cuticle pusher to help with this step.
Next, file the surface of your nails. Filing creates a rough texture that will help the gel nail extensions adhere better. Use a nail file to gently buff the surface of your nails, paying particular attention to the areas where the extensions will be applied.
After filing, it is time to apply the base coat. The base coat protects your natural nails and enhances the adhesion between your nails and the extensions. Apply the base coat evenly to all your nails, and then cure them under a UV/LED lamp for about 30 seconds. The gel will stick to the areas where the base coat is applied, so be careful to avoid applying it to unwanted areas.
Now it's time to choose the right nail forms for each finger. Select the best form from the nail box, ensuring it fits well and leaves ample space between the model and your natural nails for the extension. A good fit is crucial for comfortable and natural-looking extensions.
Before applying the gel, make sure you are in a darker place, as poly gel is sensitive to light. Take a small amount of gel from the tube using the spatula tool provided in the kit. Apply the gel to the dual form, using the brush and slip solution to extend the width and length as desired. Remember, the poly gel should be thickest in the middle of the form for a natural-looking curve.
Finally, gently press down on the rest of the nail to remove any air bubbles. Air bubbles can cause lifting, so it is important to eliminate them. Turn the nail over and smooth out the back of the poly gel to ensure a seamless finish.
Gel Nails: Can They Fall Off?
You may want to see also
Explore related products
Applying the base coat
- Start by gently cleaning your natural nails. Remove any dead skin and cuticles surrounding the nails. This will ensure that the nail surface is ready for the base coat application.
- File the surface of your nails gently. Filing creates a rough surface that improves adhesion, allowing the base coat to stick better.
- Choose a darker environment for the next steps as poly gel is sensitive to light.
- Apply the base coat evenly to each nail. The base coat will protect your natural nails and provide a strong foundation for the nail extensions.
- Cure your nails under a UV/LED lamp. Place your nails under the lamp for approximately 30 seconds. The gel will adhere firmly to the areas where the base coat is applied.
- After curing, carefully inspect your nails to ensure that the base coat has been applied evenly and smoothly.
Remember to follow the specific instructions provided with your Jewhiteny gel nail kit for the best results. The kit includes all the necessary tools, such as a nail lamp, nail file, and base coat, to help you achieve a long-lasting and beautiful manicure.
Gel Nails vs Powder: Pros and Cons
You may want to see also
Explore related products
Using the nail lamp
Before you begin, ensure you have prepared your nails by gently cleaning them, removing any dead skin and cuticles, and filing the surface to create a rough texture for better adhesion.
Now, you can apply the base coat to your nails. This will protect your natural nails and enhance the adhesion of the nail extensions. Once you have applied the base coat evenly, it's time to cure it under the nail lamp.
The JEWHITENY kit comes with a mini 6W nail lamp that is compatible with all kinds of gel nail polish. The lamp is big enough for your fingernails and toenails and has a convenient pocket size with a USB cable. Place your nails under the lamp for the recommended amount of time.
For the JEWHITENY kit, curing times vary depending on the type of lamp. If you are using an LED lamp, cure for at least 30 seconds. If you are using a UV lamp, increase the curing time to 2 minutes. The gel will adhere only to the places where the base coat is applied, so ensure you apply it evenly.
After curing, gently move the edge of the nail model until it pops out. Repeat this process for all your nails. Once you have finished, file and shape your nails, and then wipe them to remove the adhesive layer.
Finally, apply the top coat and style your nails as desired with nail polish, rhinestones, or other decorations.
Olive & June: Is Their Nail Polish Gel-Based?
You may want to see also
Explore related products
Applying the poly gel
Next, apply a base coat to protect your natural nails and improve adhesion between the nail and the extension. Cure the base coat under a UV/LED lamp for 30 seconds. The gel will stick to the base coat, so be sure to apply it evenly. Choose the best-fitting nail form for each finger, leaving ample space between the model and your natural nail for the extension.
Take a small amount of gel and apply it to the dual form. Use a brush and slip solution to extend the width and length of the gel, ensuring the thickest part is in the middle of the form. Gently press down on the rest of the nail to push out any air bubbles, which can cause lifting. Turn the nail over and smooth out the back of the poly gel. Clean the nail form's edge to ensure the gel is even with your natural nail. Cure for at least 30 seconds in an LED lamp or 2 minutes in a UV lamp.
Finally, gently move the edge of the nail model until it pops out. File and shape the nail, then wipe it off to remove the adhesive layer.
Gel Nails: Tips and Tricks Without UV Light
You may want to see also
Explore related products
Finishing and styling
Once you've applied the poly gel, gently press down on the rest of your nail to push out any air bubbles. It's important to get rid of bubbles, as they will cause lifting. Turn your nail over and smooth out the back of the poly gel to ensure it's even.
Then, cure your nails for at least 30 seconds in an LED lamp or 2 minutes in a UV lamp. You can also cure your nails for 60-90 seconds under a 48W nail lamp. After curing, gently move the edge of the nail model until it pops out. Repeat this process for all your nails.
After you've finished applying the poly gel to all your nails, file and shape them. Then, wipe off your nails to remove the adhesive layer. Apply the top coat that came with your kit, and style your nails with nail polish, rhinestones, or other decorations.
The JEWHITENY Poly Extension Gel Nail Kit comes with three little pots of glitter flakes, so you can add some sparkle to your nails. You can also use the top coat they provide to cure your nails and make the colour last longer.
Gel vs Acrylic Nail Polish: What's the Real Difference?
You may want to see also
Frequently asked questions
First, clean your nails and remove any dead skin. File the surface of your nails to ensure better adhesion. Apply the base coat to protect your nails and improve adhesion between your nails and the nail extensions. Cure it under a UV/LED lamp for 30 seconds. Choose the best form to fit each finger, usually leaving ample space between the model and your natural nails for the nail extension. Take a small amount of gel and apply it to the dual form. Using the brush and slip solution, extend the width and length of the gel, ensuring the poly gel is thickest in the middle of the form.
Cure your nails under the UV/LED lamp for at least 30 seconds or 2 minutes in a UV lamp to complete the curing process.
Poly gel nails can last for at least 20 days if applied properly.
