Ava Monroe
Gelaze is a gel nail polish by China Glaze that offers a wide range of shades and a convenient, time-saving application process. Gelaze is a two-in-one gel polish with a base coat built into the formula, requiring fewer steps than a traditional gel manicure. The product is compatible with both LED and UV lights and can be easily applied at home. In this guide, we will take you through the steps of performing a dry manicure, curing with an LED/UV lamp, and achieving the perfect gel manicure with Gelaze.
How to use Gelaze Gel Nail Polish
| Characteristics | Values |
|---|---|
| Number of steps | Fewer steps than the traditional gel manicure |
| Manicure type | Dry manicure |
| Nail preparation | Remove shine from nails with a buffer |
| Number of coats | 2 |
| Cure time per coat | 30 seconds under an LED lamp or 2 minutes under UV |
| Top coat | Gelaze Gel Top Coat |
| Top coat cure time | 30 seconds under LED or 2 minutes with UV |
| Removal method | Wipe nails with a Gelaze Pre-Soaked Gel Cleanser Pad |
| Removing residue | Break the seal of the gel nail with a nail file |
| Saturate Gelaze Professional Gel and Nail Polish Remover Wrap with Gelaze Gel Remover |
Explore related products
What You'll Learn
Gelaze Gel-n-Base in One: a two-in-one gel polish with a built-in base coat
Gelaze Gel-n-Base in One is a two-in-one gel polish with a built-in base coat. This means that there is no need for a separate base coat, as is usually required with gel nail polish. It is compatible with either LED or UV light.
To use Gelaze Gel-n-Base in One, first perform a dry manicure and remove any shine from the natural nail with a buffer. Next, apply a thin coat of the Gel-n-Base in One gel polish. Cure for 30 seconds under an LED lamp or two minutes under UV light. Repeat this process for a second coat.
After applying two coats of the colour, finish with a thin coat of the Gelaze Gel Top Coat. Cure this for 30 seconds under LED light or two minutes under UV light. Finally, wipe the cured nails with a Gelaze Pre-Soaked Gel Cleanser Pad to remove any sticky residue.
To remove Gelaze Gel-n-Base in One, first break the seal of the gel nail with a nail file. Then, saturate a Gelaze Professional Gel and Nail Polish Remover Wrap with Gelaze Gel Remover. This will remove the polish in 10 minutes. If the gel is resistant, rewrap the nail and soak for an additional 10 minutes.
Best Places to Buy LED Gel Nail Lamps
You may want to see also
Explore related products
Curing the gel polish: the process and timing
Curing the gel polish is a critical step in the gel manicure process, and it involves using a UV or LED lamp to harden and set the gel polish. This process transforms the gel polish from a liquid to a solid state through a chemical reaction called polymerisation, which is initiated by exposing the gel to UV or LED light.
The timing of curing depends on the type of gel polish and lamp used. Different brands of gel polish have specific curing time requirements, and these can vary from as little as 30 seconds to two minutes or more per coat. It's important to follow the manufacturer's instructions for the gel polish and lamp to ensure proper curing. Some gel polishes may require longer curing times if they have a thicker consistency or if a more durable finish is desired.
To cure the gel polish, start by applying a thin coat of the gel base coat to each nail, capping the free edge to create a chip-resistant finish. Then, cure the base coat under the UV or LED lamp for the recommended time, typically around 45 seconds to one minute. After the base coat is cured, you can proceed with applying the gel colour coat in thin layers, curing each layer separately. The colour coat usually requires a curing time of about 60 seconds per layer.
Finally, apply a gel top coat to seal in the colour and add shine and protection. Cure the top coat under the lamp for at least a minute. It is normal for the nails to feel sticky after curing, and this can be removed by wiping the nails with a cotton ball or pad soaked in acetone or alcohol.
The Science Behind Setting Gel Nail Polish
You may want to see also
Explore related products
Applying a top coat: the Gelaze Gel Top Coat
Applying a top coat is an important step in the Gelaze gel nail polish process. Here is a detailed guide on how to apply the Gelaze Gel Top Coat:
Firstly, ensure that you have completed the previous steps of a dry manicure, removing the shine from your natural nail with a buffer, and applying the Gel-n-Base in One gel polish, curing each coat for 30 seconds under an LED lamp or two minutes under UV light.
Now, you are ready to apply the Gelaze Gel Top Coat. Take your bottle of Gelaze Gel Top Coat and apply a thin, even coat over your cured Gel-n-Base. The top coat is essential as it seals and protects your manicure, adding a layer of shine and longevity. Cure your nails under the LED lamp for 30 seconds or two minutes under UV light. This step is crucial as it hardens the top coat, providing a durable finish.
After curing, your nails may feel sticky or have a gel residue. To remove this, take a Gelaze Pre-Soaked Gel Cleanser Pad and wipe each nail gently. This will remove the tacky layer, leaving your nails smooth and shiny.
Finally, admire your work! The Gelaze Gel Top Coat will give your manicure a professional finish, and your nails will be strong and chip-resistant. Remember, proper application and curing are key to achieving the best results and ensuring your manicure lasts.
You can also use a regular China Glaze polish and finish it with a top coat of gel. This method is known as the RNP Sandwich and can be a great way to expand your colour options. However, for the best results, it is recommended to use a separate base gel coat to prevent nail discolouration.
Gel Cleanser vs Nail Polish Remover: Are They Interchangeable?
You may want to see also
Explore related products
Removing the gel nail polish: the steps and products to use
Removing gel nail polish can be a challenging task, especially if it has been on for an extended period. Here are the steps and products you can use to effectively remove gel nail polish:
Step 1: File the Top Layer
Using a nail file, gently buff and file away the top layer of your gel nail polish. This step is crucial as it breaks the seal and allows the remover to penetrate the gel polish more effectively. Be careful not to over-file and damage your natural nails.
Step 2: Prepare the Remover
Soak a cotton ball or pad in acetone, a powerful solvent often used to remove nail polish. You can also use a gel nail polish remover wrap, which is saturated with remover. Place the soaked cotton directly on your nail.
Step 3: Wrap with Foil
Take a small piece of foil paper and wrap it around your finger, securing the cotton ball in place. This helps to keep the acetone from evaporating too quickly and ensures it stays in contact with the nail.
Step 4: Wait and Remove
Leave the foil wraps on for approximately 15 to 20 minutes. Then, carefully remove the foil and cotton, and use a cuticle pusher or a gentle metal tool to scrape off the softened gel polish. It should come off easily without needing to apply too much pressure.
Step 5: Moisturize
After removing the gel nail polish, it is important to wash your hands and nails, and then apply a generous amount of moisturizer or cuticle oil to your nails and the surrounding skin. This helps to nourish and protect your nail beds, keeping them healthy and strong.
It is worth noting that if your gel nail polish is of the hard gel variety, it may not dissolve with acetone. In such cases, filing or professionally drilling it off may be the only option. Additionally, if you are using Gelaze gel nail polish, they offer their own line of removal products, including the Gelaze Professional Gel and Nail Polish Remover Wrap and the Gelaze Pre-Soaked Gel Cleanser Pad.
Explore the Best Gel Nail Polishes for Home Use
You may want to see also
Explore related products
Comparing Gelaze to regular China Glaze nail polish
Gelaze is a soak-off gel nail polish line by China Glaze. It is a gel-in-base formula that does not require a base coat. The product is compatible with both LED and UV light. The application process involves buffing the nail to remove shine, applying a thin coat of the gel-in-base polish, curing it under an LED or UV lamp, repeating the process for a second coat, and then applying a thin coat of the top coat. The top coat is then cured under an LED or UV lamp, and the nails are wiped with a pre-soaked gel cleanser pad to remove any sticky residue. To remove the polish, the seal of the gel nail is broken with a nail file, and the nails are saturated with a gel and nail polish remover.
Regular China Glaze nail polish, on the other hand, does not require curing under an LED or UV lamp. It is applied like traditional nail polish and does not require a base coat or top coat, although these can be used if desired.
In terms of wear, some users report that Gelaze lasts for weeks without chipping or peeling, while others find that it chips within 24 hours or peels off within a day. The regular nail polish formula also has varying reports of longevity, with some users stating that it lasts for weeks without chipping, while others experience chipping within a few days.
The colour range of Gelaze is more limited compared to regular China Glaze nail polish, with 49 shades available in the Gelaze line. However, the colours are designed to match the most popular shades of China Glaze nail polish, so users can find similar colours in the gel formula.
Overall, both products offer a range of colours and finishes, but the Gelaze formula provides a longer-lasting, more durable manicure with a faster application process due to the fewer steps involved.
Medication Impact on Gel Polish: What You Need to Know
You may want to see also
Frequently asked questions
First, perform a dry manicure and use a buffer to remove shine from the natural nail. Then, apply a thin coat of Gel-n-Base in One gel polish and cure for 30 seconds under an LED lamp or two minutes under UV light. Repeat the process for a second coat. After that, apply a thin coat of the Gelaze Gel Top Coat and cure again for 30 seconds with LED or two minutes with UV. Finally, wipe the cured nails with a Gelaze Pre-Soaked Gel Cleanser Pad to remove any sticky gel residue.
To remove Gelaze gel nail polish, first break the seal of the gel nail with a nail file. Then, saturate a Gelaze Professional Gel and Nail Polish Remover Wrap with Gelaze Gel Remover.
Yes, it is possible to use regular polish with a gel top coat. This method is known as the RNP Sandwich and requires a separate base gel for the best results.
The Gelaze version is similar but not exact. It is a little lighter and loses some of the lit-from-within quality. However, unless compared side by side, it is difficult to notice the difference.
