Ava Monroe
Beetles Builder Gel is a versatile product that can be used for a variety of nail enhancement techniques, including hard gel extensions, gel overlays, and nail strengthening. It is a 5-in-1 formula that serves as a cover gel, nude gel, translucent gel, builder gel, and strengthener gel. The gel is highly pigmented and offers excellent coverage and opacity with just a few coats. It is also self-levelling, making it easy to work with and allowing for smooth and effortless application. This guide will take you through the steps to achieve strong and durable nails with a lightweight, natural finish using the beetles builder gel.
| Characteristics | Values |
|---|---|
| Preparation | Trim, file, and buff nails for a clean and dry surface. Push back the cuticle. Remove shine from the natural nail with a file or a drill, especially around the cuticle and edges of the nail. Use a brush to remove dust and clean. |
| Base coat | Apply a thin base coat and cure under a UV/LED lamp for 60–90 seconds. |
| Colour gel | Apply the first thin layer of colour gel polish and cure under a UV/LED lamp for 60 seconds. Apply a second layer and cure. Apply a third layer if needed and cure. |
| Top coat | Finish with a layer of top coat, curing under a UV/LED lamp for 90–120 seconds. |
| Removal | Lightly buff off the shine from the top of the nails using a nail buffer. Soak a cotton ball or pad with nail gel remover and place it on the nail. Wrap the nail with aluminium foil and allow the remover to soak for a minimum of 15 minutes. Remove the cotton and foil, then gently push off the gel using a removal wand. |
| Properties | Self-levelling formula, high pigmentation, and versatile. |
Explore related products
What You'll Learn
Prepping your nails
To prep your nails for the Beetles Builder Gel, start by trimming, filing, and buffing your nails for a clean and dry surface. Push back your cuticles and remove any shine from your natural nails with a file or a drill, especially around the cuticle and edges of the nails. Use a brush to remove dust and clean your nails. You can also use a nail buffer to lightly buff off the shine from the top of your nails. Ensure your nails are completely dry, clean, and oil-free.
Before applying any gel polish, it is important to prepare your nails properly to ensure the best adhesion and long-lasting results. This includes shaping your nails to your desired length and form, as well as creating a smooth surface for the gel to be applied.
Additionally, you should be cautious when using the product in direct sunlight, as some users have reported experiencing a gel allergy after using the product in a brightly lit environment. It is recommended to use the right full lamps to cure your nails, as using direct sunlight can lead to adverse effects.
The Beetles Builder Nail Gel is a versatile product that can be used for various nail enhancement techniques, including hard gel extensions, gel overlays, and nail strengthening. It is suitable for natural nails and can provide strength and stability without sacrificing its lightweight feel.
The Ultimate Guide to Top Coats for Gel Nails
You may want to see also
Explore related products
Applying the base coat
To apply the base coat, start by preparing your nails. Trim, file, and buff your nails for a clean and dry surface. Push back your cuticles and remove any shine from your natural nails with a file or a drill, especially around the cuticle area and the edges of your nails. Use a brush to remove any dust and clean your nails.
Next, open the bottle of base gel and apply a thin coat to your nails. Remember to avoid applying the gel to your skin or cuticles. Make sure you also cap the nail edge by applying gel to the edge of each nail with the brush held horizontally. This will help seal the gel and prevent chipping.
Cure your nails under a UV/LED lamp for 60-90 seconds. The type of lamp you use will depend on your personal preference and what is available to you. Remember that the gel will only cure under LED or UV light, so do not expose your nails to direct sunlight during this process.
After curing, lightly buff your nails to remove any excess shine. This will help the next layer of gel adhere better to your nails. Remember to brush or blow away any dust created during the buffing process.
Gel Nails for Nurses: Is It Allowed?
You may want to see also
Explore related products
Applying the colour gel
Now that your nails are prepped and you've applied your base coat, it's time to move on to the colour gel. The Beetles Builder Nail Gel comes in a variety of shades, including a natural pink tone called Sunset Flamingo.
Apply a thin first layer of colour gel polish to each nail, wiping away any excess gel with a brush before curing. Cure your nails under a UV or LED lamp for 60 seconds.
Next, apply a second layer of colour gel polish, again wiping away any excess gel before curing. Cure your nails for another 60 seconds.
If you desire a more opaque look, you can apply a third layer of colour gel polish, following the same steps as before and curing for 60 seconds.
Remember, it's important to work with thin layers of gel polish to avoid shrinkage and peeling. With its high pigmentation, the Beetles Builder Nail Gel will provide excellent coverage and opacity in just a few coats.
Create Marble Nails with Gel Polish: Easy DIY Steps
You may want to see also
Explore related products
Curing the gel
If you are using a UV lamp, it is recommended that you cure the gel for a minimum of 2 minutes. However, if you are using an LED lamp, 60 seconds should be sufficient. It is important to note that not all lamps are created equal, and the wattage, make, and model can affect the curing time. Therefore, it is always a good idea to refer to the manufacturer's instructions or recommendations for the specific lamp you are using.
When curing the gel, it is important to remember to cap the edges of your nails with the gel. This helps to create a protective barrier that prevents chips and peeling, ensuring the longevity of your manicure.
Additionally, it is recommended to avoid wiping the stickiness from the nails in between coats. This is because the stickiness helps the next layer of gel adhere better, reducing the risk of chipping or peeling.
Finally, it is worth mentioning that the curing process can be affected by the thickness of the gel. If you find that the gel is too thick, you can place the sealed bottle in a cup of warm water for about a minute to thin it out. This will help ensure that the gel cures properly, especially at the lower layers.
Gel Nails: How Many Fills Can You Get?
You may want to see also
Explore related products
Finishing with a top coat
When you are happy with the colour of your nails, it is time to finish them with a top coat. This will give your nails a protective, long-lasting finish.
First, ensure your nails are completely dry. Then, apply a thin layer of top coat. Remember, the thinner the layer, the better. If you apply too much, the gel will shrink and peel off. Cure your nails under a UV/LED lamp for 90-120 seconds.
If you are using a 5-in-1 gel, you can skip the top coat as this product acts as a cover gel, builder gel, and strengthener gel all in one. However, if you are using a 7-in-1 gel, you will need to finish with a top coat as this product does not include a cover gel.
If you want to remove the gel polish, start by lightly buffing off the shine from the top of your nails using a nail buffer. Then, soak a cotton ball or pad with nail gel remover and place it on top of each nail. Wrap your nails with aluminium foil or a nail wrap and allow the remover to soak for a minimum of 15 minutes. Finally, remove the cotton and foil and gently push off the gel using a removal wand.
Gel Nail Polish Sticky After Curing: What Could Be Wrong?
You may want to see also
Frequently asked questions
First, trim, file, and buff your nails for a clean and dry surface. Push back your cuticles and remove any shine from the natural nail with a file or a drill, especially around the cuticle and edges of the nail.
After preparing your nails, apply a thin base coat and cure under a UV/LED lamp for 60-90 seconds. Next, apply the first thin layer of colour gel polish and cure under the lamp for 60 seconds. Repeat this step for a second layer and a third layer if needed. Finally, finish with a layer of top coat, curing under the lamp for 90-120 seconds.
The Beetles Builder Gel is a 5-in-1 or 7-in-1 formula, serving as a cover gel, nude gel, translucent gel, builder gel, and strengthener gel all in one bottle. It is highly pigmented and offers excellent coverage and opacity with just a few coats. The gel is also self-levelling, making it easy to work with and allowing for smooth and effortless application.
