Isla Bennett
CND Shellac is a long-lasting nail polish that combines the ease of standard polish with high-performance wear and shine. It can be tricky to remove, and it is recommended that you get it professionally removed to avoid damaging your nails. However, if you want to remove it at home, you will need an acetone-based polish remover, such as OFFLY FAST, and a plastic-backed lint-free pad. First, buff the surface of the nail polish with a nail file to allow the remover to penetrate more effectively. Then, soak a pad in the remover and place it on your nail, wrapping your finger in aluminium foil to hold it in place. After five to 15 minutes, the nail polish should have softened, and you can wipe it away.
| Characteristics | Values |
|---|---|
| Removal product | Acetone-based remover (e.g. OFFLY FAST Moisturizing Remover) |
| Removal tools | Plastic-backed lint-free pad, orangewood stick, CND foil remover wrap, CND Scrubfresh |
| Removal technique | File, soak, and scrape method |
| Removal tips | Avoid picking or peeling off the gel polish. Do not buff the top layer. |
Explore related products
What You'll Learn
Use an acetone-based remover
CND Shellac and CND Vinylux are long-lasting nail polishes that can be challenging to remove. An effective way to remove them is by using an acetone-based nail polish remover. Acetone is a powerful solvent that can quickly break down and dissolve substances. It is a very common ingredient in nail polish removers and is likely familiar due to its distinct odour and flammability.
To use an acetone-based remover, start by ensuring you are in a well-ventilated area. Acetone can irritate the eyes, nose, and throat, and even cause coughing, so it is important to avoid inhaling large amounts. It is also crucial to avoid using acetone near open flames, as it is highly flammable. With acetone-based removers, you should also check your skin for any open cuts or cracked skin, as direct contact with acetone can allow it to be absorbed into your bloodstream. If acetone comes into contact with your skin, wash the area thoroughly with soap and water.
Once you have ensured a safe environment, you can begin the removal process. First, saturate a plastic-backed, lint-free pad with an acetone-based remover, such as CND Offly Fast. Place the pad on your nail and hold it there for about five seconds. Then, using firm pressure and a circular motion, remove the colour from the nail plate. Concentrate on the nail itself, avoiding the surrounding skin.
After removing the polish, it is important to wash your hands with soap and water to get rid of any residue. Finally, moisturise your hands and nails to counteract the drying effects of the acetone.
Easy Fake Nail Removal: A DIY Guide
You may want to see also
Explore related products
Buff the surface
Buffing the surface of your nails is an important step in the process of removing CND 7-day nail polish. It helps to "break the seal" of the polish, allowing the remover to penetrate more effectively. Here is a step-by-step guide to buffing your nails:
Firstly, it is important to note that you should not buff the top layer of your natural nail plate. This can cause damage to your nails. Instead, focus only on the surface of the nail polish. Use a traditional medium-grit (180-grit) nail file or buffer to gently buff the top layer of the nail polish. Apply light and parallel pressure to avoid scratching the delicate nail underneath. You may also use a nail buffer or cuticle stick for this step.
If your nail polish is particularly stubborn, you may need to loosen it up with an acetone soak before buffing. Simply soak a cotton ball or pad in acetone and hold it on your nail, or wrap your finger in aluminium foil to keep it in place. Then, use your nail file or buffer to gently buff the surface of the nail polish, removing the loosened layers.
Repeat the soaking and buffing process as needed, being careful not to apply too much pressure or buff for too long, as this can damage your natural nails. Once most of the nail polish has been removed, you can use a plastic-backed, lint-free pad saturated with CND Offly Fast or a similar product to remove any remaining residue.
It is important to note that buffing may not be necessary for genuine CND Shellac. However, if you are having trouble removing the polish, buffing the surface can help the process. Always be gentle and avoid applying too much pressure to protect your natural nails.
How to Use Nail Polish Remover to Fix Car Headlights?
You may want to see also
Explore related products
Soak nails in acetone
To remove CND Shellac nail polish, you will need to soak your nails in acetone. This can be done by drenching cotton balls or pads in acetone and holding them in place on your nails by wrapping each finger with aluminium foil. You can also use a plastic-backed, lint-free pad saturated with acetone. Place the pad on the nail plate and hold it there for five seconds, then use firm pressure in a circular motion to remove the colour from the nail plate.
If you are using an acetone-based remover, it is important to note that acetone can be harsh on the skin. To protect your skin, apply a light layer of petroleum jelly or cuticle oil around your nails before wrapping them. Make sure to wash off the acetone thoroughly after removal and apply another coat of cuticle oil or petroleum jelly to replenish the moisture in your nails.
It is recommended to use at least 90% acetone for effective removal. Soak your nails for the amount of time specified on the product instructions. If you are using CND Shellac, the soak-off time will vary depending on the product, ranging from 5 minutes for XPRESS5 to 15 minutes for Duraforce.
After soaking, the first few coats of nail polish should begin to peel off easily. If you encounter more stubborn layers, you may need to loosen them with another acetone soak. Repeat the soaking-and-scraping method until you have safely removed all of the colour.
As an alternative to acetone, you can use a non-acetone remover, such as Cutex's Non-Acetone Nail Polish Remover, which is typically less irritating to the skin.
How to Use Nail Polish Remover on Tile
You may want to see also
Explore related products
Remove residue
To remove residue from CND Shellac or Vinylux nail polish, you can use a plastic-backed, lint-free pad saturated with OFFLY FAST. Rub the nail with the pad to remove any remaining residue.
If you are removing CND Shellac, you can also use CND Scrubfresh to remove any remaining residue.
For both types of nail polish, you can also use a nail file, buffer, or cuticle stick to gently scrape away any remaining layers of nail polish. If you encounter stubborn layers, you can loosen them with another acetone soak.
If you are using acetone, you can protect your skin by applying a light layer of petroleum jelly or cuticle oil around your nails before wrapping them.
Non-Acetone Nail Polish Remover: Effective for Fake Nails?
You may want to see also
Explore related products
Moisturise
Moisturising is an important step in the process of removing CND 7-day nail polish. After removing the nail polish, it is recommended to wash your hands thoroughly and then apply a moisturiser. This helps to replenish any moisture lost during the removal process, especially if you have used acetone to remove the nail polish.
You can use a variety of moisturisers to nourish your nails and the skin around them. Petroleum jelly, such as Vaseline, is a good option to create a hydrating barrier. You can also use cuticle oil, which is designed to nourish the nails and cuticles. Olive oil can also be used as a natural alternative. If you want to be more selective, you can try a cuticle-specific product like Olive & June’s Cuticle Serum.
If you are using acetone to remove your nail polish, you may want to consider applying a light layer of moisturiser or cuticle oil around your nails before you begin. This will help to protect your skin and nails from the drying effects of acetone.
Additionally, CND Offly Fast, which is recommended for removing CND nail polishes, contains macadamia seed oil. This helps to keep your nails moisturised and prevents dehydration, which can occur when using pure acetone.
Removing Glue from Nails: No Acetone Method
You may want to see also
Frequently asked questions
You will need an acetone-based polish remover, a plastic-backed lint-free pad, and an orangewood stick. First, apply the remover to the pad and place it on the nail plate for around five seconds. Then, use firm pressure in a circular motion to remove the colour. Finally, rub the nail with the pad to remove any residue.
It is recommended to have your CND Shellac removed by a trained professional. However, if you are removing it at home, do not pick or peel the gel polish. Instead, buff the surface of the product and use remover, leaving it to soak for longer if needed.
It is recommended to use CND Offly Fast, which is designed to work with CND Shellac. This can be used with CND foil remover wraps. However, you can also use acetone, which is stronger and more effective than non-acetone removers.
The removal process for CND Vinylux is similar to that of CND Shellac. First, remove any existing nail colour with an acetone-based polish remover and a plastic-backed lint-free pad. Then, trim and shape the nails if necessary. Finally, apply a cuticle remover and gently push back the cuticles.
