Isla Bennett
Eyebrow piercings are a popular form of self-expression, but changing your eyebrow ring with long nails can be tricky. It is important to understand the type of eyebrow piercing you have, how to safely remove and replace your ring, and how to clean your piercing site to avoid injury and infection. With the right knowledge and tools, you can comfortably put on a new eyebrow ring and showcase your unique style.
How to put on an eyebrow ring with long nails
| Characteristics | Values |
|---|---|
| Piercing pain | An eyebrow piercing is considered to be one of the least painful piercings as there are not a lot of nerves in the brow area |
| Healing time | An eyebrow piercing takes about 3-4 months to fully heal, but it can take up to 5-6 months depending on various factors |
| Aftercare | The area should be cleaned twice a day with gentle soap. Waxing, threading, and other forms of brow maintenance should be avoided. The area should also be kept free of makeup and skincare products that could cause irritation |
| Jewelry type | Hoop or ring eyebrow piercings are popular. Titanium and gold jewelry are recommended for their healing properties |
| Jewelry gauge | It is important to choose jewelry of the same gauge as the original piercing to avoid complications such as scarring and tearing |
| Jewelry removal | To remove the eyebrow ring, unscrew the balls that hold the jewelry in place. Clean and store the balls in a container |
| Piercing site | The piercing site should be softened using a cotton swab or sterile gauze soaked in warm water |
| Jewelry insertion | The new jewelry should be lubricated with a water-based lubricant or soap and water. The bar or ring of the new jewelry is then pushed gently through the piercing |
| Jewelry closure | Cotton balls, rubber gloves, or cloth can be used to screw the balls onto the ends of the new jewelry to hold it in place |
| Lubricant removal | Cotton swabs or gauze soaked in warm water can be used to remove any excess lubricant from the piercing site |
Explore related products
What You'll Learn
Clean your hands and piercing site
It is important to clean your hands and the piercing site before putting on an eyebrow ring to prevent infection. Here is a step-by-step guide:
Cleaning Your Hands
- Wash your hands with hot water and neutral pH hand soap. Scent- and dye-free glycerin soap is a good option.
- Rub your hands vigorously together for about 30 seconds.
- Rinse your hands thoroughly with warm water.
- Dry your hands with a clean towel or paper towels.
Cleaning the Piercing Site
- Soak a cotton swab or sterile gauze in warm water.
- Apply the damp cotton swab or gauze to both ends of the piercing to soften the openings.
- Once you have removed any existing jewellery, clean the piercing site with soap and water, witch hazel, or saline contact solution. You can use a cotton swab or gauze pad soaked in one of these cleansers and apply it to the piercing.
Remember to always clean your hands before touching your piercing site to avoid transferring bacteria.
Trim Your Dog's Nails: Stop the Bleeding Fast
You may want to see also
Explore related products
Choose the right jewellery gauge
Choosing the right jewellery gauge for your eyebrow piercing is crucial. While the jewellery's size refers to the length of the barbell or labret, the gauge indicates how thick the bar is. Smaller gauge numbers are used for thicker bars, so a 20-gauge barbell is thinner than a 12-gauge piece.
For eyebrow piercings, a 16-gauge needle is typically used, and this is the recommended gauge for initial piercings. The 16-gauge size is equivalent to 1.2mm in thickness. An 18-gauge (1.0mm) option is also available, but it is less standard and you should ensure that this thinner gauge is suitable for your skin type and healing process.
The length of the eyebrow barbell is another important consideration. The barbell should be long enough to allow for swelling during the healing process, which typically takes two to six months. The 10mm (3/8") length is a common choice as it provides ample space for swelling. If you have thinner eyebrows or prefer a snug fit, an 8mm (5/16") barbell may be suitable. On the other hand, a 12mm (1/2") barbell is recommended for those with thicker eyebrows or those who desire a more prominent jewellery style.
It is important to consult with your piercer about the jewellery gauge and follow their recommendations. They will consider factors such as the appearance you desire and your skin type to suggest the most appropriate gauge for your eyebrow piercing. Remember, choosing a gauge that is too small or too large can negatively impact the healing process and increase the risk of infections and skin irritation.
Soaking Nails in Acetone: How Long is Too Long?
You may want to see also
Explore related products
Lubricate the jewellery
Lubricating the jewellery is an important step in putting on an eyebrow ring, especially when you have long nails. This is because it makes inserting the replacement eyebrow ring quicker and more comfortable.
To lubricate the jewellery, apply a small amount of water-based lubricant or neutral pH soap to either end of the ring or bar piercing. Gently move the eyebrow jewellery back and forth to spread the lubricant into the piercing. If there are threads at one or both ends where the balls attach, be extra careful.
Water-based lubricants are recommended for eyebrow piercings. You can also use soap and water to coat the ring or post of your replacement jewellery. This will ensure a smooth and easy insertion process.
If you are experiencing resistance when pushing the bar or ring through the piercing, do not force it. Instead, add additional lubricant to make the placement of the new jewellery more comfortable.
Once the jewellery is in place, you can use cotton swabs or gauze soaked in warm water to remove any excess lubricant from the piercing site.
Choosing the Right Nails for Vinyl Siding
You may want to see also
Explore related products
Push the jewellery through the piercing
To put an eyebrow ring on with long nails, you must first lubricate the jewellery. Using a water-based lubricant or soap and water, coat the ring or post of your replacement jewellery. This will make the insertion process smoother and more comfortable. It is important to choose jewellery of the appropriate gauge—it should be no more than 1/8 of an inch larger or smaller than the previous jewellery. Smaller jewellery may cause pulling or tearing, and larger jewellery may migrate or be rejected by your body.
Once the jewellery is lubricated, you can begin to push it through the piercing. Be careful not to push too hard, as this may damage the piercing site. If you encounter resistance, add more lubricant to make the process more comfortable. Take your time and be gentle to avoid irritation or injury.
If you are switching from a barbell to a hoop, ensure that your piercing is fully healed first. Titanium and gold jewellery tend to heal better, so consider choosing one of these materials, especially if you have sensitive skin. Implant-grade titanium, in particular, is a good choice for its quality and safety level.
After inserting the jewellery, attach the balls or other closures securely but not too tightly, as this will make future removal more difficult. Use cotton balls, rubber gloves, or cloth to carefully screw the balls onto the ends of the jewellery. Finally, use warm water to remove any excess lubricant from the piercing site.
The Perfect Nail Drying Time: How Long is Enough?
You may want to see also
Explore related products
Attach closures
Once you've cleaned your hands and piercing site, and lubricated the new jewellery, you can carefully push the bar or ring through the piercing. Be careful not to push too hard, and add more lubricant if necessary.
Now, it's time to attach the closures. Use cotton balls, rubber gloves, or a cloth to carefully screw the balls onto the ends of the jewellery. This will hold the eyebrow ring in place. Don't screw the closures too tightly, as this will make the jewellery more difficult to remove. Also, avoid using pliers, as this will also make removal more difficult.
If you have long nails, it may be helpful to use a cloth to attach the closures, as this can provide more grip and reduce the risk of dropping the jewellery. You may also want to ask a friend or family member with shorter nails to help, to reduce the risk of dropping and potentially contaminating the jewellery.
Remember, it's important to take your time and be gentle when attaching the closures. Avoid touching the piercing site with your fingers, as this can introduce bacteria and increase the risk of infection. If your piercing is still healing, it's especially important to be careful and avoid any actions that may irritate or damage the piercing.
Impress Nails: Making Them Last
You may want to see also
Frequently asked questions
First, wash your hands and clean the piercing site. Then, unscrew the balls from the eyebrow ring and store them in a container. Lubricate the new jewellery and push the bar or ring through the piercing. Finally, screw the balls back onto the ends of the jewellery.
To avoid damaging your nails, you can use rubber gloves when handling the small pieces of your eyebrow ring. You can also use cotton balls or a cloth to screw the balls back on.
You should use a water-based lubricant or neutral pH soap.
You should choose an eyebrow ring that is comfortable and light, such as one made with surgical-grade 316L stainless steel.
