Ava Monroe
Orly Gel FX nail polish is a long-lasting, chip-resistant, and hard-wearing gel polish that can last up to 3 weeks. It is packed with vitamins and is free from harmful and toxic chemicals such as toluene and formaldehyde. The polish is easy to apply and can be cured under a UV/LED lamp. The following steps can be taken to apply Orly Gel FX nail polish: push back the cuticles, use Orly's special cleanser to remove any oils from the nail surface, apply the Gel FX Primer with a thin brush, apply a layer of Gel FX Basecoat, cure the nails under a lamp, remove the sticky layer with the Orly Dry Brush, apply two layers of coloured gel polish, apply the Gel FX Topcoat, and cure the nails for 30 seconds.
How to apply Orly Gel FX nail polish
| Characteristics | Values |
|---|---|
| Application | Push back cuticles, degrease nail plate, apply primer, apply base coat, cure under lamp, remove sticky layer, apply two layers of colour polish, apply top coat, cure under lamp, remove sticky layer |
| Cure time | 30 seconds per layer, or 60-90 seconds in total |
| Lamp type | UV/LED |
| Removal | Use products specifically designed for gel manicure removal |
| Results | Manicure lasts for 2-3 weeks without chipping, cracking, or peeling |
| Formula | Free from harmful and toxic chemicals, vegan, cruelty-free, vitamin-infused |
Explore related products
What You'll Learn
Push back cuticles and cleanse nails
To apply Orly Gel FX nail polish, you must first prepare your nails by pushing back the cuticles. This can be done with a cuticle pusher, which you can purchase at most drugstores or beauty supply stores. Be gentle and avoid pushing too hard, as this can damage your nails and surrounding skin. Once the cuticles are pushed back, you can move on to the next step of cleansing your nails.
Cleansing your nails is an important step to ensure that your Orly Gel FX nail polish adheres properly and lasts longer. Start by washing your hands with soap and warm water to remove any dirt or oil. Then, use a nail polish remover to wipe away any leftover residue or oil on your nails. You can use a cotton pad or ball soaked in nail polish remover and gently rub it on your nails. Make sure to get the underside of your nails as well. Finally, rinse your hands again with soap and warm water to remove any remaining nail polish remover.
Alternatively, you can use Orly's special cleanser to remove any oils from the nail surface. This product is designed to effectively cleanse the nails and prepare them for the application of Orly Gel FX nail polish. Follow the instructions on the cleanser and make sure to dry your hands thoroughly before moving on to the next step.
By pushing back the cuticles and cleansing the nails, you create a clean and smooth surface for the nail polish to adhere to. This helps ensure that your manicure will last longer and look neater. It is important to follow the correct steps and take your time during the application process to achieve the best results.
The Ultimate Guide to Luminary Gel Nails
You may want to see also
Explore related products
Apply primer to nails
To apply primer to your nails when using the Orly Gel FX nail polish system, start by pushing back your cuticles. Then, use a nail cleanser, like the special one from Orly, to remove any oils from the nail surface. This is an important step to ensure the nail polish adheres properly to your nails.
Next, take a thin brush and dip it into the Gel FX Primer. Apply this primer to the free edge of your nails, which are the tips of your nails beyond the flesh. After applying the primer, wait for 30 seconds to let it dry.
It is important to note that the primer is not the same as the base coat. The primer is used to help the nail polish adhere to your nails, while the base coat is used to create a smooth surface for the colour to be applied.
By following these steps, you will effectively apply the primer to your nails when using the Orly Gel FX nail polish system.
Gel Nail Varnish: Damaging or Safe for Nails?
You may want to see also
Explore related products
Apply base coat and cure under a lamp
After you've pushed back your cuticles and used a cleanser to remove any oils from your nail surface, it's time to apply the base coat. With a thin brush, carefully apply a layer of Orly Gel FX Basecoat to your nails. This will help the colour adhere to your nails and provide a smooth surface for the gel polish. Once you've applied the base coat, it's time to cure your nails under a lamp.
Orly Gel FX nail polish is designed to be cured under a UV or LED lamp. You can use the Orly Gel FX LED lamp, which is specifically designed for this purpose. Place your nails under the lamp and follow the recommended curing time. Typically, curing under a lamp for 30 seconds is sufficient. However, some people prefer to cure for 60-90 seconds, especially when using a rubber base coat.
During the curing process, the photo initiators in the LED or UV lamp will react with the gel polish, starting a chemical process that transforms the liquid gel into a solid, hard-wearing finish. This process is what gives gel polish its long-lasting, chip-resistant properties. It's important to note that the lamp is crucial to the proper application of gel polish, as it ensures the polish sets and dries correctly.
After curing, you will notice a tacky or sticky layer on your nails. This is normal and can be easily removed. Simply use the Orly Dry Brush to gently wipe away this layer, preparing your nails for the next step. Your nails are now ready for the colour application! Remember to seal the tips of your nails with each layer of colour to ensure a long-lasting manicure.
Sunlight's Effect on Gel Nails: Cure or Damage?
You may want to see also
Explore related products
Remove sticky layer with Orly Dry Brush
Removing the sticky layer with an Orly Dry Brush is an important step in achieving a smooth and glossy finish with Orly Gel FX nail polish. This step ensures that your manicure has a flawless and professional look. Here's a detailed guide on how to do it:
After applying the Gel FX base coat and curing your nails under a lamp, you'll notice a tacky or sticky layer on your nails. This is normal and is a result of the polymerization process. To remove this sticky layer, follow these steps:
- Take your Orly Dry Brush and gently sweep it across the surface of your nail. Use light, feathery strokes to avoid applying too much pressure.
- Work on one nail at a time to avoid rushing and to ensure thorough removal.
- Ensure that you cover the entire nail surface, including the edges and cuticle area.
- After brushing each nail, examine it closely to ensure that the sticky layer is completely removed.
- Once you have removed the sticky layer from all nails, proceed to the next step of applying the coloured gel polish.
Remember, the key to successfully removing the sticky layer is to be gentle and thorough. Take your time and ensure that you don't miss any spots. By following these steps, you'll be able to achieve a smooth and long-lasting manicure with Orly Gel FX nail polish.
Gel vs. Regular Nail Polish: Which Is Superior?
You may want to see also
Explore related products
Apply two layers of colour, sealing tips
After applying the base coat and curing your nails under a lamp, it's time to move on to the coloured polish. This is where you can get creative and choose a shade that reflects your personal style. The Orly Gel FX range offers a wide palette of rich shades to select from.
When you have your chosen colour to hand, it's important to remember to apply two layers of colour, sealing the tips each time. This technique ensures a smooth and even finish that will last. Take your time with each layer, using a thin brush to carefully apply the polish. Start at the free edge of the nail and work your way towards the cuticle. Be sure to seal the edge of the nail to prevent chipping. Allow each layer to dry for 30 seconds under the lamp before proceeding to the next layer.
The key to achieving the perfect gel manicure is patience and precision. Take your time with each step, especially when applying the colour. It's important to work in thin layers and avoid overloading the brush with too much product. This will help you achieve a flawless finish.
Orly Gel FX polishes are highly pigmented, so a little goes a long way. With just two thin coats, you can achieve full coverage and a vibrant shade. Remember to cure each layer under the lamp to ensure proper drying and hardening of the polish. This process will give your manicure its renowned durability, keeping your nails looking perfect for up to three weeks.
Gel Nails and Regular Nail Polish: Can They Mix?
You may want to see also
