Caleb Foster
The Aritaum - MODI Gel Nail Design Tip offers an easy way to transform your nails with trendy colours and patterns. The Korean cosmetics brand Aritaum, a subsidiary of the Amorepacific Corporation, offers a range of makeup, skincare, hair treatments, and hand and nail care products. The MODI Gel Nail Design Tip is a long-lasting gel-type nail sticker that can be applied in a few simple steps. Firstly, ensure your nails are clean and free of any oil or dirt. Then, choose a sticker that is similar in size to your nail. Remove the transparent film at the back and start at the cuticle, smoothing the sticker down against the nail, ensuring it adheres smoothly. Finally, file away any excess sticker with a nail file.
| Characteristics | Values |
|---|---|
| Step 1 | Remove oil and moisture from nails |
| Step 2 | Choose the right-sized nail sticker |
| Step 3 | Remove the transparent film at the back of the sticker |
| Step 4 | Start at the cuticle, smooth the sticker down against the nail |
| Step 5 | File away the extra sticker using a nail file |
| Step 6 | Apply a thin layer of undercoat to the bottom of the nail tip and let it dry |
| Step 7 | Apply a thin layer of base coat and wait for it to dry |
| Step 8 | Apply 1-2 layers of nail polish and wait for it to dry |
| Step 9 | Apply a thin layer of top coat |
Explore related products
What You'll Learn
Remove oil and dirt from your nails with a prep pad or gel nail cleanser
It is important to remove oil and dirt from your nails before applying gel nail tips or nail stickers. This is because sweat, oils, creams, and any other moisture present on your natural nails will reduce adhesion. To do this, you can use a prep pad or a gel nail cleanser.
If you are using a prep pad, gently wipe your hands and nails with it. This will remove any oil and moisture from your nails and hands. If you are using a gel nail cleanser, make sure your nails are completely clean and free of any dirt or oil.
It is also important to remove any moist or oil from your nails before applying a base coat. This will help the base coat to adhere properly and create a smooth surface for the rest of your manicure. Allow your nails to dry completely before moving on to the next step.
Once your nails are clean and dry, you can choose the appropriate size gel nail tip or nail sticker. Select a size that is slightly smaller than the width of your nail. Peel the gel nail tip or nail sticker from its backing and apply it to your natural nail, leaving a slight gap between the cuticle and the tip.
After applying the gel nail tips or nail stickers, you can use a gel lamp to cure and harden them. Follow the specific instructions for your gel lamp to ensure proper curing. Once cured, your gel nails will be long-lasting and stylish!
Shellac vs Gel Nails: What's the Real Difference?
You may want to see also
Explore related products
Choose the right-sized nail sticker for your nail
When applying nail stickers, it is important to choose the right size for your nails. Start by measuring the width of your nails. Then, select a nail sticker that is slightly smaller than the width of your nail. This will ensure that the sticker adheres properly and does not overlap with the skin around your nail.
To apply the nail sticker, start by removing any oil or dirt from your nails using a gel nail cleanser. This will help the sticker to adhere better. Then, choose the right-sized nail sticker for your nail and remove the transparent film at the back. Place the sticker onto your nail, starting at the cuticle, and smooth it down against the nail. Make sure that the sticker adheres smoothly to the nail without any creases.
If there are any extra bits of the sticker hanging over the edge of your nail, you can use a nail file to gently file them away. This will give your nails a more polished and professional look. Finally, apply a top coat over the sticker to protect it and give it a glossy finish.
It is important to note that you should not apply a thick layer of the top coat, as this can reduce adhesion and increase drying time. Follow the specific instructions that come with your nail stickers for the best results. With the right-sized nail stickers and proper application, you can achieve long-lasting and trendy nail designs.
Gel Nails: How Long Before a Change is Needed?
You may want to see also
Explore related products
Remove the transparent film from the back of the sticker
To apply the Aritaum Modi Gel Nail Design Tip, you must first remove any oil and dirt on your nails using a gel nail cleanser. Then, choose a nail sticker that is similar in size to your nail.
Now, you can remove the transparent film from the back of the sticker. This film will be covering a sticky adhesive side, which will attach to your nail. Removing this film is essential, as it allows the sticker to adhere smoothly to your nail.
To remove the film, start by gently lifting or peeling a small corner. You can use your fingernail or a small, sharp object, like tweezers or a toothpick, to do this. Once you have lifted a corner, you can slowly and carefully peel the film away from the sticker. Ensure you do not touch the adhesive side too much, as natural oils from your fingers may reduce its stickiness.
After removing the film, you are ready to apply the sticker to your nail. Place the sticker at your cuticle and smooth it down against your nail, ensuring it adheres smoothly with no creases.
Removing Gel Nail Polish: A Step-by-Step Guide
You may want to see also
Explore related products
Start at the cuticle, smooth the sticker down against the nail
To apply the nail sticker smoothly, start at the cuticle and gently lay the sticker down against your nail. Ensure the sticker is smooth and flat against your nail with no creases or air bubbles. You can use your thumb and index finger to gently press the sticker down, working from the cuticle outwards.
It is important to remove any oil or moisture from your nails before applying the sticker. This will ensure the sticker adheres properly. You can use a prep pad or a gel nail cleanser to do this. Once your nails are clean and dry, you can choose the correct size of the sticker. It should be similar in size to your nail but leave a slight gap from the cuticle.
After applying the sticker, you can use a nail file to shape the edges and remove any excess. You can also use a gel lamp to set the sticker, or apply a top coat to protect the sticker and give it a glossy finish.
The key to a smooth application is to take your time and ensure your nails are clean and dry. This will help the sticker adhere properly and reduce the risk of creases or air bubbles.
Gel Manicure Pricing: Natural Nails Edition
You may want to see also
Explore related products
File away any excess sticker with a nail file
When applying the Aritaum - Shiro & Maro x Aritaum MODI All In One Nail Kit, it is important to remember to file away any excess sticker with a nail file. Here is a step-by-step guide on how to do this:
Prepare Your Nails
Before you begin filing, ensure your nails are clean and dry. Use warm water and soap to remove any oils or dirt from your hands and nails. You can also use a nail brush to get under your nails and remove any dirt or debris. Dry your hands and nails thoroughly with a soft, fluffy towel.
Choose the Right Nail File
Select a soft-grit nail file, such as an emery board file. A softer grit, around 180-200, will provide the smoothest filing experience and help prevent rough or scraggly edges. Avoid using metal files, as they can be harsh and difficult to control. Glass or crystal files are also effective alternatives and can be easily cleaned in the dishwasher.
File Away Excess Sticker
Now, you can begin filing away any excess sticker. Hold the nail file perpendicular to the edge of your nail. Start by holding the file so that the surface touches your nail straight on. Use this angle to gently file away any excess sticker, being careful not to file too aggressively, which can weaken or damage your nails.
Shape Your Nails
As you file away the excess sticker, you can also shape your nails. Depending on the desired shape, you can use nail trimmers to cut straight across the end of your nails for a square shape or make smaller cuts at the end of each nail for a round or oval shape. For almond, coffin, or stiletto nails, cut down the sides of your nails to create a narrow shape towards the ends.
Finish and Care
Once you have filed away the excess sticker and shaped your nails, you can finish by applying a drop of cuticle oil to each nail. Wait 1-2 minutes for it to absorb, then dab off any excess with a paper towel. Remember to file your nails every couple of weeks to maintain their shape, but avoid filing more than once a week to prevent weakening or damaging them.
Gel Nails: UV Light Curing Explained
You may want to see also
