Ava Monroe
The KISS Brush-On Gel Nail Kit is an at-home manicure kit that promises to give you super-strong and long-lasting gel nails. The kit includes everything you need for a full manicure, including a brush-on gel, activator, brush cleaner, mini file, manicure stick, and nail tips. The brush-on gel is applied like nail polish and does not require curing under a UV light. The kit also comes with detailed instructions and cautions to help you achieve the best results. With its wider brush for even application and 40% more glue, the updated kit promises a salon-like finish at a lower cost and in less time.
Characteristics and Values Table for the KISS Brush-On Gel Nail Kit
| Characteristics | Values |
|---|---|
| Finish | Super strong, long-lasting, smooth and shiny |
| Curing Light | Not needed |
| Drying Time | Under 5 minutes |
| Number of Manicures | Enough for 2 full manicures |
| Contents | Brush-On Gel, Brush-On Gel Activator, Brush Cleaner, 48 Tips (24 Natural, 24 French), Mini File, Manicure Stick, Instruction Sheet |
| Application | Brush-on application, similar to nail polish |
| Removal | Use KISS Glue OFF or soak in acetone-based polish remover |
| Cost | $12-14 |
| Where to Buy | Drugstores, Amazon, Walmart, Ulta |
Explore related products
What You'll Learn
Preparing your nails
Protect your work area: Start by laying out some paper towels, a rag, or newspaper to protect your work surface from any spills or messes.
Trim and file your nails: Begin by trimming and filing your nails to your desired shape and length. If you plan on using artificial nail tips, you may want to trim your natural nails short to ensure a comfortable fit.
Push back cuticles: Use a manicure stick to gently push back your cuticles. This will create a neat and clean base for the artificial nails or gel polish.
Buff your nails: Lightly buff the surface of your natural nails to remove any shine and natural oils. This step will help the gel polish or glue adhere better to your nails. Be careful not to over-buff, as excessive filing can damage your nails.
Clean your nails: Wipe your nails with acetone polish remover to remove any dust or residue from buffing. It is important to ensure your nails are clean and free of any oils or dirt before proceeding.
Select the correct nail tip sizes: The KISS Brush-On Gel Nail Kit comes with a variety of nail tip sizes. Lay out the tips in the order of your fingers and select the ones that best fit each nail. You may need to customise the fit by filing the sides of the tips for a more accurate fit.
By following these steps, you will have properly prepared your nails for the application of the KISS Brush-On Gel Nail Kit. Remember to work carefully and patiently, as proper preparation is key to achieving a neat and long-lasting manicure.
Gel Nails: Hair Washing Wait Time?
You may want to see also
Explore related products
Applying the gel
Firstly, protect your work surface with paper towels, a rag, or newspaper. Prepare your nails by gently pushing back cuticles with a manicure stick. Trim and file your nails to your desired shape and length. It is important to note that you should not over-file your natural nails as this can damage them. If you are using artificial nail tips, select the correct size for each finger and set them aside in order. You may need to file the sides for an accurate fit.
Now, you are ready to begin the gel application. Start by applying an even layer of Brush-on Gel to one nail, avoiding the skin and cuticle area. Work on your dominant hand first and treat each nail as you would when applying nail polish. Ensure you do not apply too much gel to avoid it oozing over the edges.
The next step is to use the brush from the Brush Cleaner and dip it into the Activator. Apply a thin coat of Activator over the wet gel, just as you would with nail polish. Be sure to wipe the brush on a paper towel and return it to the Brush Cleaner after each nail to maintain its cleanliness and softness.
Repeat these steps for all ten nails. For enhanced opacity, you can apply a second and even a third layer of the Gel/Activator combination. Finish by applying a thin layer of Brush-on Gel to all ten nails as you would a top coat. The gel will self-level and set to a hard, smooth, and shiny surface in under five minutes.
With these steps, you can achieve a salon-like gel manicure at home with the KISS Brush-On Gel Nail Kit.
Gel-X Nails: How Long Do They Really Last?
You may want to see also
Explore related products
Using the activator
Preparing the Nails
Before applying the activator, it's important to prepare your nails properly. Start by protecting your work surface with paper towels. Then, use a manicure stick to gently push back your cuticles. Trim and file your nails to your desired shape. If you're applying nail tips, select the correct size tip for each finger and set them aside in order.
Applying the Brush-On Gel
Apply an even layer of the Brush-On Gel to one nail, avoiding the skin and cuticle area. Work on one nail at a time to ensure precision. The gel is applied just like regular nail polish.
Now, for the activator! Dip the brush into the activator solution and apply a thin coat over the wet gel. It's important to work with wet gel to ensure proper adhesion. Wipe the brush on a paper towel after each nail to prevent the solution from hardening, and return the brush to the Brush Cleaner solution to keep it soft and ready for the next application.
Repeat this step for all ten nails. Remember to keep the activator brush soft by regularly wiping it on a paper towel and returning it to the Brush Cleaner.
Additional Layers for Opaqueness
For a more opaque and vibrant look, you can add additional layers of the Brush-On Gel and Activator. Apply a second layer of the gel and activator combination, following the same steps as before. If needed, you can even add a third layer to achieve your desired opacity.
Final Steps
Once you've applied the activator to all nails and added any additional layers, finish with a thin layer of Brush-On Gel on all ten nails as you would a top coat. The Brush-On Gel will self-level and set to a hard, smooth, and shiny surface in under 5 minutes.
And that's it! You've successfully applied the activator and completed your KISS Brush-On Gel Nail manicure. Enjoy your beautiful nails and show them off to the world!
Gel Z: The Ultimate Guide to This Revolutionary Product
You may want to see also
Explore related products
Removing the tabs
Preparing the Nails:
Before applying the gel nails, it is essential to prepare your natural nails. Start by pushing back your cuticles with a manicure stick. Then, trim and file your nails to your desired shape and length. It is recommended to cut or file the gel nail tips before application to ensure they fit your natural nails perfectly. Next, lightly buff the surface of your nails to remove any shine and natural oils. This step will enhance the adhesion of the gel nails. Finally, wipe your nails with acetone polish remover to remove any dust or residue.
Applying the Gel Nails:
With your natural nails prepared, it's time to apply the KISS Brush-On Gel Nail Kit. Select the correct size tip for each finger and set them aside in order. Apply the Brush-On Gel to the back well area of the nail tip, which adheres to your natural nail. Slowly lower the tip onto your natural nail and hold it firmly until it sets. Repeat this process for the rest of your nails.
Removing the Easy-Apply Tabs:
Now, it's time to remove the Easy-Apply Tabs. This step requires a gentle touch to avoid damaging the gel nail application. Grab the tab and gently bend it up and down to loosen it. It is crucial to avoid twisting or pulling the tabs off, as this can cause damage to the gel nail application.
Final Steps:
After removing all the tabs, inspect your nails for any bumpy or jagged edges where the tabs were attached. Use a nail file or buffer to gently smooth out any imperfections. Finish by wiping away any dust with a clean paper towel, ensuring your nails are free of any debris.
By carefully following these steps, you can ensure the removal of the Easy-Apply Tabs is seamless and does not impact the overall finish of your gel manicure.
Aura Nails: Gel Polish Application Techniques
You may want to see also
Explore related products
Finishing the manicure
Now that you've applied the gel and activator to all ten nails, it's time to finish with a thin layer of Brush-on Gel on all nails as you would a top coat. The Brush-On Gel products will self-level and set to a hard, smooth, and shiny surface in under five minutes.
You can enjoy your manicure as it is, or finish with your own nail polish for a different colour. You can also use the Gel/Activator combination on your toenails for a fast, fresh pedicure.
If you need to remove the gel manicure, you can do so by removing polish with a non-acetone remover. Then, gently buff the area of nail growth where the overlay meets the cuticle. Apply a small amount of Brush-On Gel to the base of the nail (growth area). Apply Brush-on Activator only to the area where Brush-on Gel was applied. Repeat the steps from "Gel Application".
For quick and easy removal, use KISS Glue OFF, or soak nails in acetone-based polish remover until soft. Wipe off the softened overlay and glue, and repeat the process as necessary. Trim off as much artificial tip as possible. Do not force or pull off the nails.
Steaming Off Gel Nails: Is It Possible?
You may want to see also
Frequently asked questions
First, protect your work surface with paper towels, a rag, or newspaper. Then, push back cuticles with a manicure stick. Trim and file nails, and lightly buff the nail surface to remove surface shine. Remove dust and wipe nails clean with acetone polish remover.
Pick out a tip that best fits each nail. They have size numbers! Lay them out in order of your fingers. You may need to customise the size by filing the sides.
Grab the nail file and use the pink buffer side to gently buff the surface of your nails until you remove the natural shine. Apply a small amount of glue to the underside of the nail on the clear band, slightly overlapping the white part. Press the tip onto your natural nail with firm pressure for about 30 seconds. Repeat for all nails.
Apply and hold the wet brush from the brush cleaner along the seam of each tip. Lightly buff the seam if necessary but avoid excessive filing on the natural nail surface.
After applying the nail tips and blending them with your natural nails, finish with a thin layer of Brush-on Gel on all ten nails as you would a top coat. The Brush-On Gel will self-level and set to a hard, smooth, and shiny surface in under 5 minutes.
![Gel Fantasy High Volume Gel, Long Length [FS04C]](https://m.media-amazon.com/images/I/61S1lMNu64L._AC_UL320_.jpg)
