Sophia Delgado
Ohora's semi-cured gel nail strips are pre-shaped to fit the area of your nail plate and come in a variety of patterns, colours, and effects. The strips are easy to apply and are made from real gel polish that is 60% cured. After selecting the right size strip for your nail, you press it on, cut off the excess, and cure it using a UV or LED lamp. The curing time varies depending on the lamp used, with UV lamps taking longer than LED lamps. The recommended curing time is 2-4 times after applying the strip and 2-4 times after applying the top coat. Once cured, the strips are durable and can last for up to two weeks without chipping.
| Characteristics | Values |
|---|---|
| Curing Time | 2 minutes under a UV lamp or 30 seconds under an LED lamp |
| Curing Process | Cure the stickers once, trim and file, then cure the remaining two times |
| Lasts | Up to 14 days |
| Removal | Slowly and carefully peel the strips off |
| Application | Choose the right size strip for your nail, press it on, cut off the excess, then cure and file |
Explore related products
What You'll Learn
The importance of nail prep
Ohora semi-cured gel nail strips are made from real gel polish that is 60% cured. They are designed to last for up to two weeks without chipping. To ensure the best results and longevity of your manicure, proper nail preparation is key.
Nail prep is important because it ensures that your nails are clean and free of excess dead skin and oils, which can prevent the nail strips from adhering properly. Start by soaking your nails and trimming any excess dead skin. Next, push back your cuticles and use the included prep pad to wipe down your nails and ensure they are completely clean and dry. If you have naturally oily nail beds or skin, you may want to use a nail dehydrator product to strip excess oils.
Proper nail preparation also includes selecting the right-sized nail strips for your natural nails. Ohora nail strips come in a variety of sizes, and you can also use scissors to custom size the strips if needed. It is recommended to always size down if you are in between sizes. When applying the strips, leave a tiny gap at the cuticle and ensure the strip isn't touching any skin on the sides to avoid overlap.
Additionally, nail prep can help prevent issues such as hair getting stuck in the nail strips. By properly preparing your nails and following the application instructions, you can minimize the chances of this occurring.
Overall, taking the time to properly prepare your nails before applying Ohora semi-cured gel nail strips is crucial for achieving the best results. It ensures proper adhesion, helps extend the wear of your manicure, and can prevent common issues.
Nail Injuries: Tetanus Risk and Prevention
You may want to see also
Explore related products
Curing and filing techniques
Ohora semi-cured gel nail strips are pre-shaped to fit your nail plate and are 60% pre-cured. This allows the nail strips to mould to your unique nail shape. After applying the strips, curing them under a UV or LED lamp will fully cure the nails.
There are different opinions on whether to file the nails before or after curing. Some people prefer to cure first, arguing that the added rigidity of curing helps improve the result of the filing. Others file before curing, believing it helps further protect the tip of the nail. It is recommended to try both ways and see what works best for you.
If you are using a UV lamp, start with your four fingers for 60 seconds, then go back and do the thumb. Repeat if necessary until the nails are hard. The final step is to file the edges until they are smooth.
If you are using an LED lamp, the curing time is faster, at 30 seconds, as it emits a narrow UV wavelength at a higher concentration.
The strips are made from real gel polish and are layered to last and be waterproof for up to two weeks without chipping.
To remove the strips, slowly and carefully peel them off. This will minimise damage to your natural nails. You may also use a drop of cuticle oil on each nail to facilitate the removal process.
Make Artificial Nails Last: Tips for Extended Wear
You may want to see also
Explore related products
Pros and cons of UV vs LED lamps
Ohora semi-cured gel nail strips require curing with a UV lamp. The curing process seals the nail strips in place, adding an intense shine and a smudge-proof, budge-proof finish.
Now, here's a comparison of UV and LED lamps to help you understand their pros and cons:
UV lamps use ultraviolet light to cure gel nails. They are compatible with various gel polishes, providing many options for users. These lamps offer a longer curing time, allowing for a meticulous and leisurely manicure. However, some users perceive UV lamps as slower than LED lamps, and they may consume more energy.
LED lamps, on the other hand, use light-emitting diode technology to cure gel nails. They are known for their faster curing times, reducing the overall manicure duration. LED lamps are also longer-lasting compared to UV lamps. However, one of their limitations is their compatibility with gel polishes. LED lamps may have specific requirements and may not work seamlessly with all gel polishes.
Both UV and LED lamps have their advantages and disadvantages. When choosing between the two, consider factors such as curing time, energy efficiency, bulb longevity, cost, and gel polish compatibility. Additionally, modern alternatives like infrared technology, air-drying systems, gel strips, and spray-on gel polish are also available, providing a range of options for those seeking specific nail-curing solutions.
Rabbits' Nails: How Short is Too Short?
You may want to see also
Explore related products
How to prevent hair from getting caught
Ohora semi-cured gel nail strips are pre-shaped to fit the area of your nail plate and are pre-cured to a 60% finish. This initial curing allows the nail strips to mould to your unique nail shape. Once the nails are applied, they need to be cured again using a UV or LED lamp. The curing time depends on the lamp used. UV lamps typically require 2 minutes, whereas LED lamps have a faster curing time of 30 seconds.
To prevent hair from getting caught in your Ohora nails, proper application is key. Firstly, ensure your nails are prepped by soaking and trimming any excess dead skin, pushing back the cuticles, and using a prep pad to ensure your nails are completely clean and dry. When applying the strips, press down firmly with an orange stick or the rubber end of the Ohora Pro Easy Dual Stick to ensure the strip is attached securely along the cuticle and sides.
After the initial cure, use a top coat to help seal down the edges. If you are still experiencing issues with hair getting caught, try using a small amount of 100% acetone to brush along the edges.
Additionally, it is important to note that nail beds are naturally oily, which can prevent the strips from adhering properly. To address this, use a nail dehydrator product to remove excess oils from your nail beds before application. When applying the strips, leave a tiny gap at the cuticle and ensure the strip isn't touching any skin on the sides.
Some people prefer to cure the strips first and then file them, as they feel it improves the result of the filing. However, others prefer to file before curing to further protect the tip of the nail. It is recommended to try both methods and see which one works best for you.
By following these steps and tips, you can help prevent hair from getting caught in your Ohora nails and enjoy your manicure for up to two weeks.
The Style of Muslim Men: Nails Long or Short?
You may want to see also
Explore related products
Removal techniques
Ohora's semi-cured gel nail strips can be removed in the following ways:
Peeling
One way to remove Ohora gel nail strips is by slowly and carefully peeling them off. This method minimises damage to the nails. To facilitate the process, you can use a drop of cuticle oil on each nail.
Easy Peel Remover
Ohora also offers an Easy Peel Remover, a specialised product designed to simplify the removal of semi-cured gel nail strips. This non-drying, nourishing, vegan, cruelty-free, and hypoallergenic formula is gentle on the natural nails and works by softening the adhesive of the gel strips, allowing them to be peeled off easily without causing damage to the nail bed or weakening the nails. The remover is equipped with a hygienic dropper, which allows for precise application of the remover liquid directly to the edges of the gel nail strips, minimising waste.
To use the Easy Peel Remover, apply a few drops of the remover at the base of the nail and use a wooden stick to gently pry up the corner of the gel strip. Then, apply a few more drops of the remover to get under the nail strip, and gently peel it off. This method should make removing the gel strips quick and easy, without the need for harsh scrubbing or soaking, which can be time-consuming and damaging to the nails and cuticles.
Additional Tips
To prevent damage to the nails during removal, it is recommended to be gentle, patient, and liberal with the amount of remover used. Applying a few drops of remover to each nail and waiting a couple of minutes before starting the removal process can help the strips slide off more easily. If the strips are still too sticky, you can add more remover and wait a little longer.
Nail Drying: How Long Should You Wait?
You may want to see also
Frequently asked questions
Cure Ohora nails for 60 seconds under a UV lamp.
UV lamps emit UV waves to cure the particles within the nail polish mixture. LED lamps emit a narrow UV wavelength at a higher concentration, targeting specific photoinitiators in the gel. This makes LED lamps faster than UV lamps.
Cure your Ohora nails 1-4 times, depending on your nail requirements.
Ohora nails are designed to last for up to two weeks without chipping. However, some users have reported that they begin to lift at the edges after 3-4 days.
Try adding additional cure time to each curing step in your process.
