Sophia Delgado
Ohora's semi-cured gel nail kits are popular among users, but some have reported issues with the removal process. The company offers an Easy Peel Remover, a non-drying, hypoallergenic solution designed to be tough on gel but gentle on nails. However, some users have experienced nail damage during removal, even when using the Easy Peel product. To avoid this, it is recommended to use a liberal amount of remover and wait a few minutes before starting the removal process. This allows the product to loosen the nail strips, making them easier to slide off without damaging the nail bed.
| Characteristics | Values |
|---|---|
| Product Name | Easy Peel Remover |
| Ingredients | Active ingredients that are tough on gel but gentle on nails |
| Application | Use 3-4 drops for each nail and wait a few minutes before removal |
| Effectiveness | May require multiple applications and waiting periods for effective removal |
| User Experience | Potential for nail damage if not used properly; gentleness and patience are key |
Explore related products
What You'll Learn
Use the Easy Peel Remover
The ohora Easy Peel Remover is a specialised product designed to simplify the removal of semi-cured gel nail strips. It is equipped with a hygienic dropper, making the process of peeling off gel nail strips more efficient, gentle, and less damaging to the natural nails. The dropper allows for precise application of the remover liquid directly to the edges of the gel nail strips, minimising waste and ensuring that the product is only used where needed. The formula of the ohora Easy Peel Remover is designed to be gentle on your natural nails. It works by softening the adhesive of the gel strips, allowing them to be peeled off easily without causing damage to the nail bed or weakening the nails.
To use the Easy Peel Remover, first, remove the plastic packaging seal from the top of the bottle and grab and lift the cap to remove it. Then, attach the dropper to the bottle by replacing the cap with the enclosed dropper and pressing it down into the bottle opening until it clicks. Drip 1-2 drops of the remover on the edge of your nail and wait 2-3 seconds for the nail strip to completely absorb it. Next, soak a wooden manicure stick with the remover and gently push the stick against the edge of your nail strip, nudging the strip in the direction of your cuticle to minimise damage to your nail. Keep pushing until the entire nail strip lifts up and detaches from your nail.
It is important to be gentle, patient, and liberal with the remover liquid when trying to remove the nail strips without damaging your nail bed. It is recommended to use 3-4 drops for each nail and wait a couple of minutes before starting the removal process. If the nail strip is still too sticky, add more remover and wait a couple more minutes. This method ensures a mess-free application and makes the process of removing Ohora nails easier and less damaging to your natural nails.
The Easy Peel Remover is a non-drying, nourishing formula that is vegan, cruelty-free, and hypoallergenic. It is infused with hydrolyzed collagen, panthenol, biotin, and copper tripeptide-1, leaving your nails soothed, moisturized, and looking their best.
Gel Nail Glue Removal: Acetone-Free Methods and Hacks
You may want to see also
Explore related products
Apply 3-4 drops for each nail
To remove Ohora nails without damaging your nail bed, you should apply 3-4 drops of the easy peel remover for each nail. This hypoallergenic solution is formulated to be tough on gel but gentle on your nails. After applying the remover, wait a couple of minutes before starting the removal process. If you notice that your nails are still sticky, add a few more drops and wait a little longer. The key is to use lots of remover and be gentle and patient. This method will allow you to remove the nail strips effectively, revealing clean and moist nails.
The easy peel remover comes with a dropper cap for hygienic and mess-free application. When using the product, place a few drops of the remover onto each nail. The specific amount may vary depending on the size of your nails and the level of adhesion. It is important to wait for a couple of minutes after applying the remover to allow it to work effectively.
During this waiting period, the remover will start to dissolve the adhesive bond between the nail strip and your natural nail. The exact amount of time required may differ based on factors such as the thickness of the nail strip and the condition of your nails. If you find that your nails are still sticky after the initial application, simply add a few more drops of the remover to each nail and wait a little longer.
By following these steps and being generous with the amount of remover used, you can effectively remove your Ohora nails while minimising the risk of damage to your natural nails. Remember to always handle your nails with care during the removal process, gently lifting the nail strips away once they have been sufficiently loosened by the easy peel remover.
Gel Nail Polish: DIY Application and Removal at Home
You may want to see also
Explore related products
Wait a few minutes
Waiting a few minutes after applying the Ohora Easy Peel Remover is crucial to ensuring a smooth and damage-free removal process. The remover contains active ingredients that work to soften the adhesive residue of the semi-cured gel nail strips, making them easier to peel off.
It is important to be patient and avoid the temptation to start peeling before the remover has had sufficient time to work. The recommended wait time is approximately 3 to 5 minutes. During this time, it is also important to avoid touching anything to prevent spreading the remover.
If you find that your Ohora nails are particularly resistant to removal, you can add a few extra drops of the remover and let it sit for an additional 10 minutes. This extra time will further soften the gel, making it easier to peel off.
Additionally, if you are still encountering resistance, try soaking your fingers in warm water for a few minutes. The heat will help to loosen the adhesive, making it easier to remove the gel strips.
By allowing the remover to work its magic and being patient during the waiting period, you can effectively remove your Ohora nails while preserving the health and integrity of your natural nails.
Gel Manicures: Weak Nails, Strong Options?
You may want to see also
Explore related products
Use a wood stick to lift
To remove Ohora nails without damaging your natural nail, it is recommended to use a generous amount of the Easy Peel Remover solution. This non-drying, hypoallergenic solution is formulated to be tough on gel but gentle on nails.
To begin the removal process, apply 3-4 drops of the Easy Peel Remover solution to each nail and wait a few minutes. If your nails are still sticky, apply more remover and wait a little longer. The gel strips should then be easy to remove.
Now, take your wooden stick and gently lift the edge of the gel nail strip. You can add a few more drops of the remover solution underneath the lifted edge to help the process. This will help loosen the adhesive and allow you to gently peel off the gel nail strip without damaging your natural nail.
It is important to be patient and gentle during the removal process. Take your time and ensure that you have applied enough of the remover solution to create a smooth and easy removal experience. By using the wooden stick to lift the edge, you can control the removal process and avoid any potential damage to your natural nails.
The wooden stick, in combination with the Easy Peel Remover solution, provides a safe and effective method to remove Ohora gel nail strips. This method ensures that your natural nails remain healthy and undamaged, allowing you to switch up your nail looks without any concerns.
Shellac Nails: Can You Remove Them at Home?
You may want to see also
Explore related products
Be gentle and patient
You can use a cuticle pusher to gently nudge the nail edge after it has been soaked. If the nail does not come off easily, soak it again. Do not force it, as this can cause damage to your natural nail. Repeat this process for each nail, taking your time and being careful not to rush.
If you are having trouble removing the nails, you can try using a gentle hand moisturiser to help loosen the adhesive. Massage the moisturiser into your hands and nails, and then try the removal process again. The moisturiser can help soften the adhesive, making it easier to remove the nails without causing any damage.
Remember to be patient and gentle throughout the removal process. Take care not to use force or aggressive tools that could damage your nails. Always ensure your hands and nails are well-hydrated and nourished before and after removal to keep your nails healthy and strong.
Dip Nails and Alcohol: A Safe Removal Method?
You may want to see also
Frequently asked questions
Ohora sells an Easy Peel Remover solution that is tough on gel but gentle on nails. Apply 3-4 drops of the solution to each nail, wait a couple of minutes, and then start the removal process.
If you notice resistance or stickiness, add a few more drops of the remover and wait a couple more minutes. Then, they should slide off easily.
Yes, you can manually remove Ohora nails without the remover, but be careful as this may damage your nails. You can try lifting the nail with a wood stick.
To prevent damage to your nail bed, be gentle, patient, and apply the Easy Peel Remover liberally.
